Milky White Polyester Hot Melt Adhesive Sheets 100 Yards Length For Textile To Fabric
Tunsing milky white polyester hot melt adhesive film for textile to fabric , PVC to fabric , veneer to MDF bonding
Model: DS0012TS
PES Hot Melt Adhesive Film Description:
This product is a thermoplastic adhesive, suitable for a variety of uses on a wide range of materials. It performs an excellent adhesion for textile, polyester, cotton, blended fabric, PVC etc. This adhesive exhibit excellent wash and dry cleaning resistance.
PES Hot Melt Adhesive Film Application:
DS0012TS development direction and application is on garment accessories, footwear, handbags, luggage, embroidery, crafts of adhesive.
PES Hot Melt Adhesive Film Physical Characteristics:
|
Composition |
Co-polyester |
|
Color |
Milk white translucent |
|
Density |
1.15±0.02g/cm3 |
|
Melt Flow Index |
20±5g/10min; Condition:ASTMD1238-04 |
|
Rhegology |
110°C -120°C |
|
Operating Temperature |
140°C -170°C |
|
Release Liner |
Glassine release paper |
|
Conventional Thickness*Width*Length/Roll |
0.08mm*50cm*100yards |
|
|
0.10mm*50cm*100yards |
|
|
0.12mm*50cm*100yards |
|
|
0.15mm*50cm*100yards |
|
|
0.08mm*100cm*100yards |
|
|
0.10mm*100cm*100yards |
|
|
0.12mm*100cm*100yards |
|
|
0.15mm*100cm*100yards |
PES Hot Melt Adhesive Film Recommended Bonding Conditions:
| Flat Press | Second Flat Press |
| Machine Setting: 120℃-140℃ | Machine Setting: 140℃-170℃ |
| Dwell Time: 5-15 seconds | Dwell Time: 8-25seconds |
| Pressure: 0.3-0.6mpa | Pressure: 0.3-0.6mpa |
Detailed Images:
Application:
Exhibition Picture:
|
Exhibitions |
We have participated in the following Exhibitions: |
|
2016 |
Canton Fair on March, 2016 |
|
2018 |
2018 14th Dhaka International Yarn & Fabric Show |
|
|
2018 Smart Cards Expo, New Delhi, India |
|
|
2018 Smart Cards Expo, Cannes, France |
Buyer Feedback:
FAQ
1 . How about hot melt adhesive film?
A: It is just a film, and the basic material is release paper. But the film is solid in room temperature, when reach its melt point,it is able to bond other materials, Different materials of hot melt adhesive film have different performances and different usages, we need understand your demands,then recommend you right products to you.
2. Do you accept OEM or ODM?
Yes ,we accept OEM and ODM,we are professional heat transfer material manufacturer ,having more than 10years experience.able to assist you R&D new products. So if you need bonding some special materials, please don’t hesitate to let us konw.
3. How do you transport the products?
If you are not urgent, we usually transport by ship because it is the cheapest way. But for the West Asia area, we deliver by train because there is no sea to ship. And for samples and urgent cargo, we transport it by air as it is the fastest way.Of course if you have other better idea about transport, we will accept it.
4. May I have your samples?
If you need some sample for reference,please let us know your fully address/ship mode with courier,and we will arrange sample for your reference.
5. How long is the lead time?
Sample lead time:3-7 days
Bulk lead time:7-10 days(depends on order quantity)
6. How do I pay for my order?
We accept L/C ,T/T ,Western Union , PayPal.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.