WIND-CT-TH4 Commutator Face Turning And Riser Surface Lathe Machine For Starter Armature
Commutator Face Turning And Riser Surface Lathing Machine For Starter Armature WIND-CT-TH4
(1) Application
The turning machine WIND-CT-TH4 can turn commutator face also Riser raisor surface of starting motor
armture, This finish turning machine is precison device for turning the excircle of commutators.
Adoption of a servo control mode to horizontal/longitudinal feeding, the machine is high effiencicy and
stability, online automated prodution can be achieve in a fully automatic armature production line.
(2) Competitive Advantages
1. Can lathe commutator surface, also starting armature commutator riser surface
2. X axis control the length of turning left right horizontal position
Z Axis control the depth of lathing in vertical position
3. Economic Type, easy opeartion for developing countries' user including India
(3) Specification
| Roundness: | ≦0.003mm |
| Surface roughness: | ≦Ra0.40 |
| Rotor outer diameter: | Ф20-Ф80mm |
| Rotor shaft length: | 32-250mm(Lengthenable customizable) |
| Rotor shaft diameter: | Ф2-Ф18mm(customizable) |
| Commutator outer diameter: | Ф4.3-Ф60mm |
| Armature OD | Ф20-Ф90mm |
| Turning capability: | rough turning Max0.20mm diameter |
| Speed amplitude modulation: | 0-60Hz |
| Feeding unit: | 1μm-0.5mm arbitrary |
| Cutting length: | Max50mm |
| Feeding speed: | Stepless adjustable |
| Control mode: | stepping, automatic |
| Operation method: | Touch screen operation |
| Air source pressure: | 5-7kg/cm² |
| Turning times: | 1-4 Any setting |
| Fixture: | Diamond V-shaped Frame |
| Total power: | 2Kw |
| Power source: | AC220V 50/60Hz |
(4) Below information is needed when you send inquiry
Armature drawing or rotor drawing
Please click below photo to view the video
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.