Agricultural Machineries Rubber Track Undercarriage With Chassis / Power Transmission
Agricultural machineries for Rubber Track with chassis and power transmission.
Customers need specifications:
Max speed required - 8 Km/hr
Driving power source - Electrical power (DC)
Driving motor power - 2 x 1/1.5/2 Kw BLDC motor.
Voltage - 24 / 48 / 72 Volts DC
Max angle should climb - 30-40 degree
Motor protection class - IP66 / IP67 /IP68
Max weight of chassis - 350 kg
Max load bearing capacity - 400 kg
Max length of chassis - 1700mm
Max width of chassis - 1200mm
BLDC Motor controller required- YES (2 Numbers)
But we can provide specificatons:
-
- Motor power - 2KW.
- Number of motors - 2PCS.
- Rated voltage of motor - 48V.
- Rated speed of the motor - 1500rpm-3000rpm
- Rated output speed of gearbox of motor - 30rpm
- Gear Ratio of gearbox - 50
- Motor type - Brushless DC motor.
- Protection class(IP RATING) - IP65
- Motor controller details - Pls confirm attached drawings.
- Sprocket diameter - 322mm
- Weight - 277.5kg
- Rubber track width - 250mm
- Load bearing weight - 800kg
- Length - 1610mm (can be adjusted)
- Width - 1200mm (can be adjusted)
- Minimum ground clearance - 190mm
Package Photos:
The feature of Rubber Tracks:
1). Less round damage
Rubber tracks cause less damage to roads than steel tracks, and less rutting of soft ground than either steel tracks of wheel products.
(2). Low noise
A benefit to equipment operating in congested areas, rubber track products less noise than steel tracks.
(3). High speed
Rubber track permit machines to travel at a higher speed than steel tracks.
(4). Less vibration
Rubber tracks insulate machine and operator from vibration, extending the machine's lifetime and lowering operate fatigue.
(5). Low ground pressure
The ground pressure of rubber tracks equipped machinery can be fairly low, about 0.14-2.30 kg/ cmm , a major reason for its use on the wet and soft terrain .
(6). Superior traction
The added traction of rubber, track vehicles permits them to pull twice the load of wheel vehicles of the sane weight.
More Models of Rubber Track Chassis,welcome to enquire about us by email or telephone:
| Length | Width | Height | Sprocket Diameter | Rubber Track Model/Width | Rubber Track Link | Weight | Load-bearing weight |
| 1700mm | 1340mm | 440mm | 243mm | LP-250/250mm | 74 | 305kg | 1 Ton |
Product Application
Our Rubber Track System can be used on many engineering machinery machine,such as:
Drilling machine: Anchor drilling rig, water well drilling rig,, core drilling rig, Jet drilling rig, down-holedrilling rig, hydraulic crawler drilling rig,, forpoling rig, multipurpose drilling rig, no-dig drilling rig, etc.
Construction machinery machine: mini excavator, mini pilling machine, Aerial work platform, Small
transport loading equipment, etc.
Coaling machine: slag-raking machine, tunnel drilling rig, hydraulic drilling machine,, rock loader, etc
Mining machine: mobile crusher, heading machine, conveying equipment, etc.
Agriculture machine: Sugar cane harvester, lawn mower, compost turner, ditching machine, etc
And the loading capacity of the rubber track system range from 0.5-15 ton.You can choose the loading
capacity you want.We can customized the rubber crawler track according to your needs,like the rubber
track system length, rubber track system total width, rubber track system width, rubber track system
height, rubber track system speed and rubber track system application.
This model of rubber track system is KRT2000,with the 1.5 ton loading capacity and 1200mm width(that can be wider as you want),and this rubber track system is used on many kind of machine.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.