smd mounting machine high speed pick and place mounter,smt pick and place ,automatic mounter,magnetic linear motor
1.product details
HT-X9 is dual-arm magnetic levitation LED high speed pick and place machine.the capacity reach 200000CPH.It is Suitable for 0.5M,1M Strip, Tube and Panel Light.it can mount LED 3014/3020/3528/5050 and resistor,capacitors,bridge rectifiers,etc.
2.product Technical parameters of high speed pick and place machine
| Model number | HT-T9 |
| Dimension | 2450*2100*1550mm |
| PCB size | 250mm*any length |
| PCB thickness | 0.5～1.5mm |
| PCB clamping | adjustable pressure pneumatic |
| mounting mode | group to take and group to mount |
| system | windows 7 |
| display | touch screen monitor |
| input device | keyboard,mouse |
| NO.of camera | 5 sets of imported camera |
| mounting precision | ±0.02mm |
| mounting height | <13mm |
| mounting speed | 200000CPH |
| components space | 0.2mm |
| NO.of feedings station | 64pcs |
| NO.of nozzles | 64pcs |
| power | 380AC 50HZ |
| power consumption | 6KW |
| operating environment | 23℃±3℃ |
| conveyor transmission | any length |
| transmission speed | >500mm/sec |
| transmission direction | single(left→right,right→left) |
| transmission mode | online drive |
| position mode | optical |
| Air Force | 0.5mpa |
| electrical control | independent research and development by ETON |
| motion control card module 1set | independent research and development by ETON |
| X.Y axis drive way | high-end magnetic linear motor+servo motor |
| feeding way | electric feeder with double motor |
3.product features of smt pick and place machine
- X,Y,Z drive way is high-end magnetic linear motor+servo motor.
- PCB clamping is adjustable pressure pneumatic.
- Vision for the flight identification ,mark correction.
- Electronic feeder feeding system.
- Non-stop material re-loading function.
- Auto-optimization after coordinates generated.
4.Packing & shipping of smt mounter machine
5.Company profile
6.Our Our certificates and certifications
7.our services
8. trade show
contact
Name:Brynn
Email :Brynn@eton-mounter.com
WeChat:13802252825
Telephone:138 0225 2825
Industry related knowledge
- Visual alignment system for mounting head of mounting machine.
With the increasing demand of electronic products for small, light, thin and high reliability, only the precise mount of fine spacing components can ensure the reliability of surface assembly mount. To accurately mount fine spacing components, generally consider the following factors.
- PCB positioning error. in general, the circuit graphics on the PCB do not always correspond to the machining holes and PCB edges that PCB the mechanical positioning, which will lead to mount errors. Furthermore, defects such as distortion, PCB deformation and warpage on the PCB will cause mount error.
- component centering error. the center line of the component itself does not always correspond to the center line of all leads, so when the mount system uses the mechanical centering claw to center the component, it does not necessarily ensure that the center line of all leads of the component is aligned. In addition, in the packaging container, or in the centering claw clamping centering, the component lead may appear bending, distortion and lap defects, that is, the lead loss coplanarity. These problems will lead to a decrease in mount error and mount reliability. the surface mount is successful when the component lead deviates from the pad by no more than 25% of the lead width, and the allowable deviation is smaller when the lead spacing is narrower.
- motion error of the machine itself. The mechanical factors affecting the precision of the patch are: the motion accuracy of the X-Y axis of the patch head or the PCB positioning table, the precision of the centering mechanism of the components and the precision of the patch. The visual system becomes an important part of the high precision placement machine.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.