3 Ton Diesel Japanese engine Forklift Truck With 4500mm Triplex Mast Forklift And Free Parts
Specifications of 3 ton diesel forklift:
| General | 1 | Model | FD30 | |||
| 2 | Power Type | Diesel | ||||
| 3 | Rated Capacity | kg | 3000 | |||
| 4 | Load Centre | mm | 500 | |||
| Characteristic&Dimension | 5 | Lift Height | mm | 3000 | ||
| 6 | Fork Size | L×W×T | mm | 1070×125×45 | ||
| 7 | Mast Tilt Angle | F/R | Deg | 6°/12° | ||
| 8 | Front Overhang (Wheel center to fork face) | mm | 480 | |||
| 9 | Ground Clearance(Bottom of mast) | mm | 140 | |||
| 10 | Overall Dimension | Length to face of fork(Without fork) | mm | 2780 | ||
| 11 | Overall Width | mm | 1230 | |||
| 12 | Mast Lowered Height | mm | 2115 | |||
| 13 | Mast Extended Height(With backrest) | mm | 4175 | |||
| 14 | Overhead Guard Height | mm | 2110 | |||
| 15 | Turning Radius (outside) | mm | 2520 | |||
| Performance | 16 | Speed | Travel (Empty load) | km/h | 20 | |
| 17 | Lifting (Full load) | mm/s | 510 | |||
| 18 | Max.Gradeability (No load/Full load) | % | 20 | |||
| Chassis | 19 | Tire | Front | mm | 28×9-15-12PR | |
| 20 | Rear | mm | 6.50-10-10PR | |||
| 21 | Wheelbase | mm | 1800 | |||
| 22 | Service weight | kg | 4250 | |||
| Power&Transmission | 23 | Battery | Voltage/Capacity | V/Ah | 12/80 | |
| 24 | Engine | Model | C490 | |||
| 25 | Manufacture | XINCHAI | ||||
| 26 | Rated output/r.p.m. | kw | 40/2650 | |||
| 27 | Rated torque/r.p.m. | N·m | 160/1600-2000 | |||
| 28 | No.of Cylinder | 4 | ||||
| 30 | Displacement | cc | 2670 | |||
| 31 | Fuel Tank Capacity | L | 70 | |||
| 32 | Transmission | Type | Hydraulic | |||
| 33 | Stage | FWD/RVS | 1/1 | |||
Main features:
ex.1 Tips on Hydraulic Oil
1 Keep the hydraulic system clean. Avoid water, other oils, dirt and other impurities mixing with oil.
2 The oil tank should maintain at a certain height. The oil temperature should not exceed the permitted range during operating.
3 Hydraulic piping system should be thoroughly cleaned when changing the oil. The new hydraulic oil must be filtered before injection in oil tank. We recommend to replace hydraulic oil after using one year.
4 Can not replace the hydraulic oil with waste oil.
ex.2 Tips on Tires
1. Always check
2. One should regularly change the tires left and right for the two tires wearing of the two tires are not the same.
3. Ensure the left and right tires are the same when changing the old tyre. Try your best to make sure the tyre before and after are the same too.
4. Do not overload, partial load.
5. Reasonable driving, minimize the brakes
6. Safekeeping. Anti-sun, anti-high temperature or burning, anti-acid or oils corrosion, anti-moisture.
After-sale service:
Nowadays we have been sell more than 100 countries. All the products of LTMG supplied withone year or 2000 working hours (which occurs first) period quality warranty.
If the machine have any problem within the warranty time, but not caused by man-made, we will send you spare parts for free.
Detail clauses and policies please see to our website and product's quality certificate.
FAQ:
1.What Certificate do you have?
LTMG workshop meet with the ISO9001:2008 Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2. Can you customize and design as the clients' requirement?
LTMG will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the LTMG warranty policy for each model.
4. Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5. What payment terms do you accept?
Normally 30% T/T in advance as deposit, blance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.Delivery time:
Standard configuration products are always in stock.
The production period of Customizing products is 30 days.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.