Heavy Duty Designed Anti Cyclone Arch Roof Steel Structure Workshop And Warehouse

>> Specification

1. Dimension: 48*40*(4.8~7.5)m

2. Roof panel: 0.7 PPGI seablue Color sheet +100mm glass wool+0.4 PPGI whitegrey color sheet

3. Surface treatment: Epoxy rich zinc primer+ Epoxy mia barrior middle paint, DFT 75um 

4. Wall: Concrete 

5. Span: 40m  

6. Cannopy: 5m length 

7. Wind load: 280km/h eaqual to 3.8kn/m2

8. Application: wedding hall 

9. Totall weight for steel structure: 118 Tons 

10. Installation: By KAFA, It takes 21 days by 5 workers

Big wind load is the unique techonology parameter. It is up to 280~300km/h , So during our design we have to neogociate that big wind load with architect. Heavy steel is the gurantee of safety.

The reason why we use steel building in Mauritius?

1. Long span without any middle column. Especially for the party centre and wedding hall. Large space without any middle column is very important. Traditional concrete structure can not meet with that request.

2. Lower cost. Concrete building will cost a lot of labors. and Especially in rain season. and Maritius equipments are very expensive, For example 25T crane is about 800usd/day.

3. Very quick installation, For this project, it is about 1920 sqms. Our 5 wokers takes 21 days finished all the project. Then customer could save a lot time to develop business but not take too much time for building.

4. Long time servise life, we can give a 50 years warrantty.

5. Safety, steel structure tenacity could have a good capacity to resist the huge wind.

>> Prefabricated steel structure building parameters:

>> Features and services:

• Short construction time

>>Factors affecting the price of steel structure Building:

1. Raw material prices
Fluctuations in the price of steel have an important impact on the price of steel structure buildings. The increase in steel prices will directly cause the overall price of steel structure buildings to rise.

2. External load
External loads include wind load, snow load, dead load, and live load. Structural engineers calculate the steel structure based on the external load. If the load is large, the amount of steel used in the structure will increase.

3. The span of the steel frame
The larger span of the steel frame, the greater the amount of steel used per steel frame. More than 30 meters is considered a large width. If the steel frame has a large span and no center pillar, the amount of steel used will increase.

4. Structure
For steel structure buildings with cranes or mezzanine floors, to ensure the safe operation of cranes, steel columns will be increased, and columns of an equal cross-section will be adopted, which will increase the amount of steel used in the building.

Conclusion:
The amount of steel used plays a vital role in steel structure buildings. Therefore, structural engineers must optimize the structure as much as possible during the design process while ensuring safety, reducing the amount of steel used, and saving costs.