Industrial recycle machine plastic shredder machine for PP PE lumps
Brief Introduction.
Plastic single shaft shredder machine is mainly used in shredding materials that are quite thick and tough such as large plastic pipes and lumps, shredder used close packed structures with hydraulic feeding system.it's featured as advanced equipment ,strong crushing capacity and high output.
Working Principle.
The main shaft keeps running at high speed, and there are many fixed robust knifes on it which can tear up the plastic blocks easily when the cart which is driven by the hydraulic system pushes the blocks froward. This shredder is really high efficient and vigorous. An invincible warrior to destory any form plastic material.
Main features:
1. Plastic single shaft shredder machine is mainly used to crush big size plastic products ,such as headpiece material, thick-walled large diameter plastic pipe, film roller, paper, fibreand others.
2. Plastic single shaft shredder machine rotary blade seat and blade can be disassembled.which makes it easier to clean and maintain.
3. Plastic single shaft shredder machine rotary bladeadopts V shape installation so that the blades can cut material evenly, It can decrease the noise and energy consumption.
4. Each rotary blade has 4 same cutting knife edge, when one side becomes dull, you can change another side into using. which prolongs the service time of rotaty blades.
5. Plastic single shaft shredder machine the main shaft is driven by gearbox, which supplies steady running and powerful speed.
6. The material keeps being pushed foward by the hydraulic system, which ensures the raw material can be crushed thoroughly and efficiently.
7. PLC program control system, automatically rotating,shut down, safe and reliable running of the machine. The blade can rotate in opposite direction.
Specification
| Model | ST1-600 | ST1-800 | ST1-1000 | ST1-1200 |
| Push Power(kw) | 1.5 | 2.2 | 2.2 | 5.5 |
| Mainmotor power (kw) |
18.5 | 37 | 37 | 55 |
| Rotary blade | 28 | 38 | 48 | 58 |
| Stationary blade | 2 | 2 | 4 | 4 |
| Shaft diameter(mm) | 220 | 400 | 400 | 400 |
| Rotate speed(r/min) | 90 | 85 | 80 |
75 |
![]()
 |
ROTOR: Various rotor configurations available for processing a wide range of materials. Blades are made from hardened DC53 steel, the blades can be turned 4 times before changing. |  |
GEARBOX: Water cooled gearbox guards against overloading. Hardened teeth on the reducer. |
 |
CE CERTIFIED: Safety devices in line with European CE Certification |  |
SHOCK ABSORBE: Absorbs vibrations caused by the shredding of the material. This protects the machine and its various parts from damage. |
 |
RAM: The hydraulic ram pushes material against the roto |
 |
BEARING SEAT: Protective bearing covers to avoid foreign contamination entering the bearing housing. Grease points to release oil at intervals to increase |
 |
SCREEN: Various screen sizes. |  |
HYDRAULIC STATION: The ram pressure and timing can be adjusted to suit different materials. From WT40 series and above the machine can be fitted with wind cooled two-speed pump. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.