Safe Efficient Card Making Auxiliary Equipment Dispenser Robot Spiral Arm Manipulator
Safe and Efficient Robot Arm Dispenser Robot Spiral Arm Manipulator
Introduction:
The HP series is suitable for 15T-400T various plastic horizontal injection molding machines for the removal of finished products and nozzles of two plate molds. Model 550/600/750/850/950, the upper and lower arm types are single-cut and double-cut, the upper and lower strokes are from 350-950, dedicated to two membranes, single function for the water inlet, full function can be clipped or simultaneously clamped The nozzle and the suction product. The claw rotation mechanism can rotate the finished product by 90 degrees. The installation of this robotic arm can increase the production capacity (20%-30%), reduce the defect rate of the product, ensure the safety of the operator, reduce labor, accurately control the production volume, and reduce waste.
Parameter:
| Model | HPVU／WU-650 |
| Size (length × width) | 1300*820mm / 1160*820mm |
| Power Source | AC220V±10V 50/60 HZ |
| Working Pressure | 5Kgf/cm² 0.49Mpa |
| Max.AllowedPressure | 8Kgf/cm² 0.8Mpa |
| Drive System | Pneumatic Cylinder |
| Control System | HS28 |
| Power Capacity | 0.2KVA |
| Recommendedl.M.M. | 50-150ton |
| Crosswise Stroke | 120mm |
| Swing angle | 50-90° |
| Vertical Stroke | 650mm |
| Max.Loading | 2Kg |
| Dry Take Out Time | 0.9s |
| Dry Cycle Time | /4.2s |
| Air Consumption | 13/12 NI/cycle |
| Net Weight | 36/48Kg |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.