White silicone free sample car Glass sealant Silicone Seal

Art No. A1000

Key Features

1. Single component, moisture curing, no dripping for vertical application
2. Good elasticity and initial adhesion, high bonding strength
3. Can withstand high strength dynamic loads; no sagging while interrupting gluing
4. Good Adhesion with various substrates such as glass, aluminum plate etc.
5. Paintable and polishable surface, outstanding application property
6. No corrosion on base material, no penetration pollution, little volatile smell
7. Good aging resistance and weather resistance

Directions for Use

Tool: Pneumatic plunger caulking gun

Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.

Steps:

1. Cut nozzle to give the required angle and bead size

2. Pierce the membrane at the top of the cartridge and screw on the nozzle

3. Place the cartridge in an applicator gun and squeeze the trigger with equal strength

Shelf Life: 12 months

Caution:

1. Sealant should be applied when room is sufficiently ventilated.
2. Avoid contact with eyes.
3. KEEP IT OUT OF REACH OF CHILDREN;
4. Store it in cool, dry and well-ventilated place below 27 degrees
5. Keep away from fire source;