UL Listed EMT One Hole Conduit Straps Zinc Plated Steel Electrical Pipe Clamps 1/2 to 4 Inch Secure Fastening Solution
HX EMT One-Hole Conduit Straps secure conduit firmly to walls, ceilings, and structural surfaces in commercial and industrial electrical installations. Zinc-plated steel construction with precision one-hole mounting design. UL 514B LISTED
| INSTALLATION PAIN POINT | HX STRAP ADVANTAGE |
|---|---|
| Multi-hole strap designs require 2-3 anchor points per unit. An electrical room with 80 straps = 240 holes to drill and anchor. Labor cost: US$340+ per room. | Single-hole design with pre-drilled precision alignment. One anchor. One screw. 40% faster installation per strap. 80 straps = 80 anchor points. Simple math, simple savings. |
| Thin-gauge stamped straps deform under conduit weight, causing sag over time. Callbacks and warranty repairs eat into profit margins. | Heavy-gauge steel body with zinc electroplating. Tested for 3x rated load. Zero deformation guarantees no conduit sag across the installation lifespan. |
| Mixed-source fastening hardware creates compatibility issues. Strap from one supplier, anchor from another = unknown pullout strength. | Complete ecosystem: straps from the same UL-certified factory as your EMT connectors, couplings, and locknuts. One quality standard, one accountability chain. |
| Generic packaging = wasted time sorting mixed sizes on-site. Foreman spends 45 minutes organizing a shipment before crews can start. | Partitioned cartons with size-labeled compartments. Each size in its own labeled polybag. Open the carton, grab the bag, start installing. Zero sorting time. |
| Parameter | Specification |
|---|---|
| Material | Heavy-Gauge Carbon Steel, Zinc Electroplated (5 Microns) |
| Trade Sizes | 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 inch |
| Mounting Type | Single Hole, Surface Mount |
| Surface Finish | Silver Zinc-Plated (Electro-Galvanized) |
| Certifications | UL 514B Listed, ISO9001:2015, SGS |
| Temperature Rating | -40 deg C to 120 deg C |
| Conduit Compatibility | EMT Thinwall, IMC, Rigid (where applicable) |
| Tightness Rating | Concrete-Tight when Properly Taped |
| MOQ | 2,000 PCS per Size |
| Lead Time | 15-20 Days per 20GP Container |
| Port | Ningbo or Shanghai, China |
- Single-Hole Fast-Track Mounting — Pre-drilled precision alignment. One anchor, one screw. 40% faster than multi-hole straps.
- Heavy-Gauge Steel Body — Tested at 3x rated load. Zero deformation. No conduit sag over time.
- Zinc Electroplated Corrosion Shield — 5-micron uniform zinc coating. ASTM B633 Type III compliant for damp and outdoor locations.
- Complete Size Range — All nine standard EMT trade sizes from one supplier. Single PO, consistent quality.
- UL 514B Listed — Full documentation for NEC/CEC submittal packages. Accepted in all jurisdictions.
- Above Ceiling EMT Runs — Secure horizontal conduit to bar joists and structural trusses in commercial ceiling plenums
- Wall-Mount Vertical Drops — Anchor EMT risers to concrete and steel walls in electrical rooms and mechanical spaces
- Outdoor Equipment Feeds — Fasten conduit to exterior walls for rooftop HVAC and parking garage lighting circuits
- Data Center Overhead Trays — Support structured cabling pathways above server racks with vibration-resistant clamping
Inner plastic bag plus partitioned corrugated export cartons with size-labeled compartments. Palletized with stretch wrap and corner protectors. OEM custom packaging: private-label carton printing, branded polybags, blister card retail packs, bilingual inserts. Free evaluation samples available. 12-month manufacturing defect warranty.
Every shipment includes material certificates, UL listing verification, and certificate of origin. 27 years of specialized conduit fitting manufacturing since 1996.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.