Hot Rolled Stainless Steel Round Bar Bright Polished Dia 1mm - 500mm
AISI SUS SS 201 stainless steel bar 201 202 301 304 304L
HAOSTEEL is one of the most professional manufacturer and supplier of 201 stainless steel bar.
Description:
Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless alloy. It was developed mid century to conserve nickel and it is used as an alternative to type 301 in some tempered applications. Because of 201’s relatively high yield strength in the annealed condition, use of 201 is limited. Type 201 is generally used in the tempered condition particularly for springs and fasteners. 201 Stainless will retain a comparable ductility to 301 even with the higher yield strength
201 stainless steel bar is widely used in hardware, machinery, petroleum, chemical industry, shipbuilding, Marine industry, boiler, heat exchanger, aerospace and aviation, environmental protection, high temperature resistance, low temperature refrigeration, corrosion resistance, automobile, medicine, food, electricity, water conservancy, construction, fertilizer urea, nuclear power, new energy equipment and other industries, favored by users.
201 stainless steel, characterized by acid and alkali resistance, high density, no bubble and pinhole polishing, is a quality material for the production of various watch case and band bottom cover.201 stainless steel is mainly used for decorative pipe, industrial pipe and some products with shallow drawing.
Chemical composition:
| Chemical Composition(%) | |||||||||||
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu | |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
| 202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | ||
| 301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | |||
| 302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | |||
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | |||
| 304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | |||
| 310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | |||
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | |||
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | |||
| 321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | |||
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | - | ||||
| 304LN | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 8.5~11.5 | - | 0.12~0.22 | ||
| 305 | ≤0.12 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 10.5~13.00 | - | |||
| 309S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 22.00~24.00 | 12.00~15.00 | - | |||
| INCONEL | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | ≤1.4 | ||
| 28 | |||||||||||
| MONEL | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | ≤34.0 | ||
| 400 | |||||||||||
| INCONEL | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 |
| 800 | Al≤0.6 | ||||||||||
| Product name | SS 201 stainless steel round bar price |
| Specification | round : diameter: 0.6-600mm |
| flat: width: 3-2000mm thickness: 0.3mm-200mm | |
| square: diameter: 2*2mm-800*800mm | |
| angle: Width: 10mm*10mm-400mm*400mm | |
| hexagonal: Diameter: 4mm-800mm | |
| length: 1000mm-6000mm, or as customers' request | |
| tolarance | +/-0.15mm |
| Standard | ASME, ASTM, EN, BS, GB, DIN, JIS, etc |
| surface finish |
180G, 320G, 400G Satin / Hairline(Matt Finish, Brush, Dull Finish) 400G, 500G, 600G or 800G Mirror finish |
| Technical treatment | Cold Rolled, Hot Rolled |
| Terms of Payment | L/C or T/T |
Finishes - Wire
XC - Extra Clean Bright Annealed or Bright Annealed and Cold Rolled Grease - Ultra bright finish (for decorative applications)
Soap - Soap coating on tempered wire to act as lubricant
Contact haosteel Wire with special wire finishes.
Cold Forming
201 is considered a formable stainless and is often drawn, stamped and headed. It work hardens easily and should be followed by anneal.
Heat Treatment
201 cannot be heat treated for hardness. Hardness can only be achieved by cold working.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.