3HP Spindle Power Motor Turret Vertical Milling Machine For Electronic Parts
Turret milling machine Taiwan original milling head
1. HT-250 resin sand is used for the body casting material and other large parts, and the table is HT-300
resin sand. The surface hardness of the Joint milling machine worktable and guide surface should be
increased from HRC-45 to 48 degree.
2. Machine body wall thickness (measured) 12MM.
3. Imported from Taiwan original milling head, Japan NSK P4 precision and spindle bearings, high precision
spindle, spindle tolerance within 0.003mm.
2. Spindle tolerance measured is less than 0.005mm, and Joint standard is 0.02/300, and full travel is less
than 0.04mm. The standard of Joint milling machine is 20% higher than industry.
3. Suitable for electronic parts, holes, slots, frame and mold processing.
4. Spindle tolerance:0.002mm
| Model | 4VB |
| Table size | 1370*254*90mm |
| X axis travel | 1000mm |
| Y axis travel | 440mm |
| Z axis travel | 390mm |
| Travel of spindle quill | 127mm |
| Max distance from the spindle nose to table | 420mm |
| Spindle rotation speed |
66-4530/(16Grades)/50HZ 80-5440/(16Grades)/60HZ |
| Spindle Taper | R8(NT30) |
| Spindle Rated power | 3HP |
| Tilt angle Forward and backward | ±45° |
| Tilt angel left and right | ±90° |
| Dimension | 1600*1800*2150mm |
| Net weight | 1500kgs |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.