MDR To SDR 26 Pin Camera Cable , Camera Data Cable 5 Meters For CCD / CMOS Camera
MDR to SDR Camera Link Cable For Industrial Camera And Frame Grabber 8M
Description:
Himatch’s camera link cable series are constructed of plenum rated 11pair+2 cores robotic cable with 3M® SDR 26pin connector, or Honda® SDR 26pin connector (Shrunk Delta Ribbon) connector, UL verified MDR connector at each end., with robust molding with thumbscrew, They offer outstanding quality, durability, and high performance for industrial CCD camera with SDR or MDR port.
Specification:
Camera Link Configuration : In Full and Medium mode , use 2 wires
| Standard | Camera Link | Transmit Speed Max | 2.04Gbps, |
| Installation mode | Dynamic /Static | Install radius (Min) | 75mm |
| Wire gauge | 28AWG | Cable OD | 9.1mm |
| Jacket Material | PVC | Connector | SDR-MDR |
| Operation Temperature | -20°C ~+ 80°C | Max Length | 15m |
Features
Real-time signals transmission,low latency
100% electronically tested for functionality
Low noise and good performance in skew
Shielded pairs provide superior signal integrity
Overall foil and braid shielded provides EMI/RFI protection
Flexible and reliable cable
Application
Industrial imaging
Machine Vision system
Industrial camera
Scanning on pipelining
Products testing
Image recognition
Factory automation
Note:
The movable cable used for fixing will not have any problems . However, the fixing cable is NOT allow used for movable applications.
When installing the cable, please consider the allowable bending radius of the cable,if the bending degree exceeds the limit of the cable's internal structure or sheathed structure, it caused the deterioration of the cable's performance. Strongly recommend that the bending radius ≥ 4 R (R is the outer diameter of cable) when cable installed.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.