High-Performance J1939 to OBD II Connector Cable for Vehicles
Price:
50
MOQ:
5,000
Delivery Time:
Negotiable
Product Description
High-Performance J1939 to OBD II Connector Cable for Vehicles
Deutsch Gray J1939 Female to OBD II SAE J1962 Female automotive cable
SAE Standards Documentation
- J1708 - Defines serial communications between ECUs on heavy duty vehicles
- J1850 - Defines serial data protocol with VPW and PWM variants
- J1939 - Defines data protocol for heavy duty commercial vehicles
- J1962 - Defines physical connector for OBD-II interface
- J1978 - Defines minimal operating standards for OBD-II scan tools
- J1979 - Defines standards for diagnostic test modes
- J2012 - Defines trouble codes and definitions
- J2178-1 - Defines network message header formats and physical address assignments
- J2178-2 - Provides data parameter definitions
- J2178-3 - Defines network message frame IDs for single byte headers
- J2178-4 - Defines network messages with three byte headers
- J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
- J2411 - Describes GMLAN protocol used in newer GM vehicles
J1962 Connector Specifications
The SAE J1962 specification provides two standardized hardware interfaces - Type A and Type B. Both are female, 16-pin D-shaped connectors with Type B featuring an interrupted groove to prevent incorrect mating.
Pin Configuration
| Pin Number | Description |
|---|---|
| 1 | Manufacturer Discretionary |
| 2 | SAE J1850 Bus + (VPW / PWM) |
| 3 | Manufacturer Discretionary |
| 4 | Chassis Ground |
| 5 | Signal Ground |
| 6 | CAN High (ISO 15765-4 and SAE J2284) |
| 7 | ISO 9141-2 / ISO 14230-4 K Line |
| 8 | Manufacturer Discretionary |
| 9 | Manufacturer Discretionary |
| 10 | SAE J1850 Bus - (PWM-only) |
| 11 | Manufacturer Discretionary |
| 12 | Manufacturer Discretionary |
| 13 | Manufacturer Discretionary |
| 14 | CAN Low (ISO 15765-4 and SAE J2284) |
| 15 | ISO 9141-2 / ISO 14230-4 L Line (Optional) |
| 16 | Vehicle Battery Power: Type A 12V/4A, Type B 24V/2A |
Technical Specifications
Material: PA66, tined plated compliant ROHS
Working Temperature: -20°C to 80°C
Over-molding: Customized
Pitch: 4mm
Voltage: 12V for car, 24V for heavy vehicle
DEUTSCH HD10 Series Connector
The HD series is an environmentally sealed thermoplastic cylindrical connector designed for heavy-duty applications in trucks, buses, cross-country vehicles, cranes, and forklifts. Provides protection against water, dust, oils, fuel, road salt, and other contaminants.
- Operating temperature range: -40°C to +125°C
- Withstands 20 test cycles from -40°C to +125°C without cracking or leaking
- Vibration resistant: 20 G's at 10-2000Hz for 2 hours
- IP68 rating: Waterproof up to 1.2 meters for 24 hours
HD10 Series Dimensions
| Cavity | Overall Length A | Overall Height ØB | Overall Length C | Overall Height ØD |
|---|---|---|---|---|
| 3 | 1.609 (40.87) | 1.069 (27.15) | 1.639 (41.63) | 0.851 (21.62) |
| 4 | 1.639 (41.63) | 1.595 (40.51) | 1.639 (41.63) | 1.281 (32.54) |
| 5 | 1.609 (40.87) | 1.218 (30.94) | 1.639 (41.63) | 1.001 (25.43) |
| 6 | 1.619 (41.12) | 1.453 (36.91) | 1.639 (41.63) | 1.141 (28.98) |
| 9 | 1.609 (40.87) | 1.593 (40.47) | 1.639 (41.63) | 1.281 (32.54) |
HD10 Series Configuration
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees
- 7,260 square-meter facility
- Specialized in economical solutions and innovative wire harness design
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Can you help with design?
Yes, we are an ODM/OEM company specializing in wire harness and cable assembly since 1999.
When do you start design work?
We provide initial design concepts for discussion. Detailed design work begins after quotation and order confirmation.
How do you handle quality issues?
Our quality and engineering teams respond to quality issues within 72 hours, committed to long-term customer relationships and superior service.
Do you have standard products to reduce lead time and tooling costs?
Yes, we maintain over 1000 sets of molds and 5000+ products with 20+ years of wire harness specialization.
Contact Us
For more information about our J1939 to OBD II connector cables and custom wire harness solutions, please contact our sales team.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Edgar Auto Harnesses LTD.
Location
288, Jinyu Team, Dani Village, Shatian Town, Dongguan, Guangdong,China
Contact Person
John