Premium J1939 to OBD II Female Diagnostic Cable for Vehicles
Price:
35
MOQ:
5,000
Delivery Time:
Negotiable
Product Description
Premium J1939 to OBD II Female Diagnostic Cable
TE connectivity black J1939 Male to OBD II SAE J1962 Female automotive diagnosis Cable
- Voltage: DC 300V 5m ohm/10 ms
- Contact resistance: 3.0 ohm MAX
- 100% open, short, and mis-wire testing
SAE Standards Documentation on OBD-II
- J1708 - Defines serial communications between ECUs on heavy duty vehicles
- J1850 - Defines serial data protocol with VPW and PWM variants
- J1939 - Defines data protocol for heavy duty commercial vehicles
- J1962 - Defines physical connector for OBD-II interface
- J1978 - Defines minimal operating standards for OBD-II scan tools
- J1979 - Defines standards for diagnostic test modes
- J2012 - Defines trouble codes and definitions
- J2178-1 - Defines network message header formats
- J2178-2 - Provides data parameter definitions
- J2178-3 - Defines network message frame IDs
- J2178-4 - Defines network messages with three byte headers
- J2284-3 - Defines 500 kbit/s CAN Physical and Data link layer
- J2411 - Describes GMLAN protocol for newer GM vehicles
J1962 Connector Specifications
The SAE J1962 specification provides two standardized hardware interfaces: Type A and Type B. Both are female, 16-pin D-shaped connectors. Type A is used for 12V vehicles, while Type B is used for 24V vehicles and features blue marking.
| Pin Number | Description |
|---|---|
| 1 | Manufacturer Discretionary |
| 2 | SAE J1850 Bus + (VPW / PWM) |
| 3 | Manufacturer Discretionary |
| 4 | Chassis Ground |
| 5 | Signal Ground |
| 6 | CAN High (ISO 15765-4 and SAE J2284) |
| 7 | ISO 9141-2 / ISO 14230-4 K Line |
| 8 | Manufacturer Discretionary |
| 9 | Manufacturer Discretionary |
| 10 | SAE J1850 Bus - (PWM-only) |
| 11 | Manufacturer Discretionary |
| 12 | Manufacturer Discretionary |
| 13 | Manufacturer Discretionary |
| 14 | CAN Low (ISO 15765-4 and SAE J2284) |
| 15 | ISO 9141-2 / ISO 14230-4 L Line (Optional) |
| 16 | Vehicle Battery Power: Type A 12V/4A, Type B 24V/2A |
Technical Specifications:
Material: PA66, tinned plated compliant ROHS
Working temperature: -20°C to 80°C
Over-molding: Customized
Pitch: 4mm
Voltage: 12V for cars and 24V for heavy vehicles
Material: PA66, tinned plated compliant ROHS
Working temperature: -20°C to 80°C
Over-molding: Customized
Pitch: 4mm
Voltage: 12V for cars and 24V for heavy vehicles
DEUTSCH HD10 Series Connector
The HD series features environmentally sealed, thermoplastic cylindrical connectors designed for heavy-duty applications including trucks, buses, cranes, and forklifts. These connectors provide protection against water, dust, oils, fuel, and other contaminants.
- Operating temperature range: -40°C to +125°C
- No cracking, chipping or leaking after 20 test cycles
- Withstands vibration levels of 20 G's at 10-2000Hz
- IP68 rating - waterproof up to 1.2 meters for 24 hours
| Cavity | Overall Length A | Overall Height ØB | Overall Length C | Overall Height ØD |
|---|---|---|---|---|
| 3 | 1.609 (40.87) | 1.069 (27.15) | 1.639 (41.63) | 0.851 (21.62) |
| 4 | 1.639 (41.63) | 1.595 (40.51) | 1.639 (41.63) | 1.281 (32.54) |
| 5 | 1.609 (40.87) | 1.218 (30.94) | 1.639 (41.63) | 1.001 (25.43) |
| 6 | 1.619 (41.12) | 1.453 (36.91) | 1.639 (41.63) | 1.141 (28.98) |
| 9 | 1.609 (40.87) | 1.593 (40.47) | 1.639 (41.63) | 1.281 (32.54) |
HD10 Series Configuration
| Position | Contact Size | Rear Threads | Plug | Receptacle Inline | Receptacle Flange |
|---|---|---|---|---|---|
| 3 | 16 | no | HD16-3-16S | HD14-3-16P | - |
| 3 | 16 | yes | HD16-3-96S | HD14-3-96P | HD10-3-96P |
| 4 | 4/16 | yes | HD16-4-4S | - | HD10-4-4P |
| 5 | 16 | no | HD16-5-16S | HD14-5-16P | HD10-5-16P |
| 6 | 16 | yes | HD16-6-96S | HD14-6-96P | HD10-6-96P |
| 6 | 12 | yes | HD16-6-12S-B010 | HD14-6-12P | HD10-6-12P |
| 9 | 16 | no | HD16-9-16S | HD14-9-16P | HD10-9-16P |
| 9 | 16 | yes | HD16-9-96S | HD14-9-96P | HD10-9-96P |
| 9 (J1939) | 16 | yes | HD16-9-1939S | HD14-9-1939P | HD10-9-1939P |
Company Profile
- Privately held company, established in 1999
- Sales volume over 16 Million USD since 2017
- OEM & ODM company with 250+ employees
- 7,260 square-meter facility
- Specialized in economical solutions and innovative wire harness design
- IATF16949 (2016) & ISO 9001 (2015) certified
- UL certified supplier with wiring No. E468011 & cable No. E479323
Certifications
Frequently Asked Questions
Can you help with design?
Yes, we are an ODM/OEM company specializing in wire harness and cable assembly since 1999.
When will you start to help design?
We provide initial design concepts for discussion. After quotation and order placement, we proceed with detailed design and confirmation.
What if quality issues occur?
Our quality and engineering teams respond to quality issues within 72 hours, as we are committed to long-term partnerships and superior service.
Do you have standard products to reduce lead time and tooling costs?
Yes, we maintain over 1000 sets of molds, many of which can be used directly for customer projects. With over 20 years of experience, we offer 5000+ products.
Contact Us
For more information about our Premium J1939 to OBD II Diagnostic Cable and other wire harness solutions, please contact our sales team.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Edgar Auto Harnesses LTD.
Location
288, Jinyu Team, Dani Village, Shatian Town, Dongguan, Guangdong,China
Contact Person
John