0.3mm Diameter Nickel Mesh Electrode , Incoloy Wire Mesh High Stress Tolerable
Stocked !!! Incoloy 800 30 mesh (30 # ) 0.3mm diameter wire woven wire mesh
Product introduction
Incoloy 800 Mesh (UNS N088011) has good strength and outstanding resistance to oxidation and carburization up to 1100oF. It is resistant to aqueous corrosion. Incoloy 800 Mesh is utilized in flue gas scrubber and chemical plants for handling phosphoric acid and sulfuric acids.
Incoloy 800 Mesh Chemistry:
| Al | C | Cr | Cu | Fe | Mn | Ni | Si | S | Ti |
| 0.15 – 0.60 % | 0.10 % | 19 to 23 % | 0.75 % | 39.5 % | 1.5 % | 30 to 35 % | 1 % | 1 % | 0.015 % |
Incoloy 800 mesh is widely utilized in the applications where temperature rises up to 1100oF. For applications above 1100oF, Incoloy 800H/800HT is recommended to provide the necessary resistance to creep and cracking.
Incoloy 800 Mesh Property Data:
| Specifications | ASTM B408 |
| Density | 0.288 lbs per cubic inch |
| Tensile Strength | 110 Kpsi* |
| Elongation | 30%* |
| Melting temperature | 2500° F |
| Highest service Temperature | 1900° F |
| Yield strength | 275 Mpa or 39900 psi |
| 213 Mop at 550oC or 30900 psi at 1020oF | |
| Electrical resistivity | 0.0000989 ohm-cm |
| Magnetic Permeability | 1.014 |
| Curie temperature | -115oC or -175oF |
| Linear coefficient of thermal expansion | 14.4 micro-m/m-oC at 20oC to 100oC |
| 8 micro-inch/inch-oF at 68oF to 212oF | |
| Specific heat capacity | 0.460 J/goC or 0.110 BTU/lb-oF |
| Thermal conductivity | 11.5 W/m-K or 79.8 BTU-in/hr-ft2-oF |
Incoloy 800H/HT Mesh (UNS No N08810/8811) provides very high creeping resistance and excellent corrosion resistance properties. It withstands higher stress than conventional industrial alloys and resists localized corrosion. Incoloy 800H/HT Mesh is used in chemical and petrochemical treatment, power units, industrial furnaces and heat processing plants.
Incoloy 800H/HT Mesh Properties:
- High stress tolerable
- Elevated temperature creeping resistance
- Prevent attack by carburization, oxidation & nitridation corrosion
Incoloy 800H/HT Mesh Chemistry:
| Alloy | Al | C | Cr | Cu | Fe | Mn | Mo | Ni | Si | S | Ti |
| Incoloy 800H | 0.2 % | .05 % | 19.5 – 23.5 % | 1.5 – 3 % | 22 % | 1 % | 2.5 to 3.5 % | 38 – 46 % | .03 % | 0.5 % | 0.6 to 1.2 % |
| Incoloy 800HT | 0.85 to 1.20 % | .06 – .10 % | 19 – 23 % | 0.75 % | 39.5 % | 1.5 % | 30 – 35 % | 0.015 % | 1 % | 0.25 to 0.60 % |
Here, please kindly note:
The incoloy 800 mesh, 30mesh 0.3mm diameter wire mesh is stocked, sample available.
Delivery time: within 3 days.
Any need, please feel free to contact with me soon !!!
Customize is available and welcomed.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.