Precision Super Fine Wire Mesh Filter Element For Sand Control 50 100 150 200 Micron

Precision super fine 50 100 150 200 micron wedge Johnson Screen filter cartridge used for sand control

Stainless steel wedge wire screen, also known as filter water pipe, is widely used in oil, gas, water well sand control industry, especially in the water well industry, and is widely used in water filtration screens. The stainless steel screen adopts a full-wound welding production process, and is welded with a special trapezoidal wire winding on a set of support wires arranged in a circumferential arrangement.

Material quality: 201, 202T, 205, 304, 304L, 316, 321, etc.

Specifications: Up to 6 meters OD from 25mm to 600mm Connection form: groove connection or threaded connection

Technical Parameters:

1. The filtration precision is 25-800μm;

2. Outer diameter: 19-914mm, continuous length up to 6 meters;

3. The common circular support rod has a cross-sectional diameter of 2-6 mm, and the commonly used strip-shaped support rod has a width of 1.5-4 mm and a height of 6-40 mm;

4. The length of the flat filter wire can reach 1800mm, and the support rod can reach 3000mm;

6. Commonly used products are square, rectangular, circular flat filter plates, filter baskets, filter cartridges.

Stainless steel wedge wire screen performance characteristics:

1. The application of the trapezoidal wire forms a V-shaped opening between the slits of the screen.

2. The trapezoidal wire continuous winding forms a continuous high-density uniform gap on the circumferentially arranged support wires.

3. The wire is connected with all the support wires by electric welding, which is durable and has a long working life.

4. According to the actual demand, the longitudinal arrangement of the support wire and the continuous slit form of the screen tube make the stainless steel screen tube have high compression resistance.

5. The advantages of stainless steel screens improve the efficiency and life cycle of the well.

Anti-winding wire screen product introduction:

Stainless steel screen tube has various forms such as positive winding, reverse winding, reverse winding, reverse reverse winding, etc. It is widely used in oil, gas and water well sand control industries, especially It has a prominent position in the well industry and is widely used in water filtration screens. The stainless steel screen adopts a full-wound welding production process, and is welded with a special trapezoidal wire winding on a set of support wires arranged in a circumferential arrangement.

Features of anti-winding wire screen:

1. By rewinding, it is generally filtered from the outside of the pipe to the inside of the pipe, and is filtered from the inside of the pipe to the outside of the pipe to achieve various uses, widely used in chemical, paper, water treatment and other industries.

2. The application of the trapezoidal wire forms a V-shaped opening between the slits of the screen.

3. The trapezoidal wire continuous winding forms a continuous high-density uniform gap on the circumferentially arranged support wires.

4. The wire is connected to all the support wires by electric welding, which is durable and has a long working life.

5. According to the actual demand, the longitudinal arrangement of the support wire and the continuous gap form of the screen tube make the stainless steel screen tube have high compression resistance.

Counter-winding wire screen parameters:

1. Gap (mm): 0.10, 0.15, 0.2, 0.25, 0.30-3

2. Opening area up to 60%.

3. Material: low carbon steel, low carbon steel galvanized, plastic spraying , stainless steel (304, 316, etc.) 4. Length is 6 meters

5. Outer diameter from 25mm to 800mm

6. Connection form: groove connection or thread connection.