sampling booth full stainless steel 304 with Pressure gauge and UV light for lab

Description

Sampling booth is a kind of partial purifying equipment for filling, refilling, weighing and sampling of raw material and compounds.

It is provided with HEPA filter, which prevents the airborne dusts by down draught technique.

The unit eliminates powder contamination to protect the operator and the surrounding environment

Mobile sampling booth can be easily moved to various raw material storage areas sampling, used for various environmental storage areas. The device maximum clean class level up to one hundred, it is the required equipment for GMP standard. The main performance parameters as below:

Noise Level : Less than 62 dB

Vibration Level : Minimum

Power Supply: 220V AC,50HZ

MOC : GI Powder Coated / SS-304 / SS-316

Inside : Side panel with all three side with coving

Three Stage filtration

Pre-filters (90% down to 10 micron)

EU7 - Intermediate Filter (95% down to 3 micron)

EU14 - HEPA Filter - Supply / Exhaust (99.999% down to 0.3 micron)

Statically & Dynamically balanced Motor-blower with isolator to reduce noise level

Fluorescent Lights with Milky White Diffuser

Differential Pressure Gauges: 02 Nos. (Intermediate & HEPA Filter)

ON/OFF Switches (BL / FL / UV)

Auxiliary Powder Socket : 5/15 Amp for external equipment

Move clean sampling vehicle to the place needing sampling. Fix it and connect it to power supply. Turn power supply on and turn fan on.
Regulate voltage to right range (usually220V); put sampling barrel in it after clean sampling vehicle works for 15min.
Take sampling barrel away after sampling. Turn off fan and shut off power supply. Move sampling vehicle to original place