800r/Min Rotating Speed Tubular Stranding Machine For 630 Bobbin

Price Negotiable

Price: Negotiable

MOQ: 1 set

Delivery Time: 90 days

Brand: Beyde

Product Description

Cable Making Machine 800r/min Rotating Speed For 630 Bobbin Tubular Stranding Machine

Planetary Type Copper Wire, Aluminum Wire, ACSR Wire Tubular Stranding Machine

1. Application for Planetary Type Copper Wire, Aluminum Wire, ACSR Wire Tubular Stranding Machine :
The machine is suitable for copper wire, aluminum wire, ACSR stranding, also can be used in insulated cores stranded and small and medium-sized wires refractory wrapped.
2. Technical parameter for Planetary Type Copper Wire, Aluminum Wire, ACSR Wire Tubular Stranding Machine :

No.	Parameter name	Unit	JGG400/6+1 Type	JGG500/6+1 Type	JGG630/6+1 Type
1	Wire-core diameter	mm	Copper 1-4 Aluminium 1.5-5	Copper 1.4-4 Aluminium 1.5-5	Copper 1.5-4 Aluminium 1.8-5
2	Max Wiring diameter	mm	20	25	30
3	Cage speed	r/min	900	800	700
4	Wiring pitch	mm	20-285	22-329	24-365
5	Wire speed	m/min	18-256.5	17.6-263.2	16.8-138.4
6	Pay-off bobbin	mm	PN400	PN500	PN630
7	Take-up bobbin	mm	PN800-PN1600	PN800-PN1600	PN800-PN1600
8	Taping head speed	r/min	128-2380 (No stage)	300-2155 (No stage)	250-2000 (No stage)
9	Taping pitch	mm	7-2004	8-877	8-1022
10	Central height	mm	700	700	700

Bobbin	PND500
Wire passing form	Inner tube
Max rotation speed of the tube	600 rpm
Material of the tube	Special steel
Remove stress	After annealing treatment, the whole stranding body is more non-deforming and will enable a much longer service life.
Dynamic balance	Whole body dynamic balance, smoothly and low noise.
3 bearings	Both ends and the middle stand by bearing, and the big bearing in the middle is forced lubrication, which reduces wear and prolongs life.
The cages in the tube	End shaft type, pneumatic wrench controls clamping or loosening bobbin.
Pay off tension	Friction belt controls the tension of wire and it is very simple.
Brake device of the tube body	Pneumatic brake.
The base of the machine	The base is welded by large I-beam and machined the top surface and the bottom surface by large planer. The whole tube body is installed on the base. The machine is easy to be installed.
Guide wheel of the wire	They are made by bearing steel, which is very wearable