High Speed Drum Twisters From 1600 To 4000mm Real Manufacturer In China

1. Application:

This machine is mainly used for large section and long power cables, stranded cables of divided conductors, non-metallic tape wrapping of cables, and steel tape armouring.

2. Main features

• The machine adopts touch screen and programmable controller to uniformly command and manage the startup, operation and synchronous rotation of motors in each part of the whole machine.
• AC variable frequency motor shall be adopted for paying off motor, winch rotating motor, winding motor, traction motor and winding and laying motor.
• The cable pitch can be set, modified and displayed on the touch screen. The left and right cable arrangement, inching and rapid movement adjustment can be set on the touch screen.
• The pay off frame of the machine adopts a separate motor, which is convenient for installation, operation and maintenance. It can rotate synchronously with the rotating take-up frame, or it can jog alone

3. Main paramter:

4. Electric control system

• Power supply voltage: three-phase five wire system, 380V (± 10%), 50Hz, single-phase control voltage 220V.
• The linkage mode of the whole machine adopts control, and PLC and touch screen are used to coordinate the operation of each part of the motor.
• Various process parameters can be set, modified and displayed on the touch screen.
• The machine is equipped with the following protection links:
• Horizontal protection of each pay off rack fork;
• Fault alarm of AC speed regulating device;
• Reset protection of hydraulic lifting table;
• Over range protection of cable arrangement;
•  Safety protection of protective cover;
• Air pressure protection;
•  Broken and finished tape protection.