Kynar 500 PVDF Coating Mirror Aluminum Composite Panel Mirror Wall Cladding
Kynar 500 PVDF Coating 1100 Alu. Alloy 3mm 0.21mm Mirror Aluminum Composite panel
Mirror aluminum composite panel structure is essentially composed of three layers which together along with a covering of highly pressurized mirror like paint (PE or PVDF) combine to form a flat panel that represent art as well as the traditional romanticized look. The two layers of aluminum sheets are bonded together permanently with an internal core of polyethylene which when covered through the paint makes the surface even more flat and highly resistant. Mirror ACM has a class 1 fire rating and shatter resistant properties. ACP can be fabricated and have v-groove introduced for folding. Mirror aluminum composite is available in both a silver and gold finish.
| Panel Thickness | 2~4mm |
| Standard size | 1220*2440mm |
| Aluminum Alloy | AA1100, AA3003, AA5005 |
| Core Layer | PE, Aluminum honeycomb, fr, corrugated aluminum etc.. |
| Width | 1220mm, 1250mm, 1500mm, 1575mm |
| Length | 2440mm, 3200mm, 4000mm, 5600mm |
| Weight | subject to panel thickness |
| Surface on front side | Polyvinylidene Fluoride (PVDF), FEVE, PET |
| Color ranges | refer to WILLSTRONG color chart, or RAL/PANTONE/DULUX color series |
| Glossiness | upon requirements |
| Back side finishes | protective coating |
Advantage of aluminum composite panel:
A. Light weight, good rigidity, high intensity, strong adhesion
B. Without any toxic materials, firepoof, anti-corrosion
C. Beautiful and delicate colors, good decorative effect
D. Easy to be fabricated to different sizes and shapes
E. Easy and fast installation, easy to recycle, no pollution.
A. Match any commercial or residential interior and exterior decoration
B. Widely used in ceiling, floor, bathroom, kitchen, cabinet, tunnel, subway, billboards, exhibitions, saloons, car, boat decoration, and more
Payment Details:
Payment Terms: T/T or L/C
Minimum Order: 600-1000 Square Meter (upon the various finish)
Delivery Details:
FOB Port: Shunde, Shenzhen, Guangzhou
Lead Time: 7 - 15 days after receipt of advanced payment & confirmation on color
Packing:
Strong wooden packing or bulk packing
REMARKS: OEM SERVICE IS AVAILABLE
| Physical Data(Extraction from SGS Lab Report) | ||
| No. | Test Item | Result |
| 1 | Pencil Hardness | 2H |
| 2 | Impact Resistance | Impact failure end point:77.5kg.cm |
| 3 | Falling Sand Abrasion | Litres of abrasive: 79.0L |
| Coating Thickness:1.1mil | ||
| Abrasion Resistance: 71.8L/mil | ||
| 4 | Specific Gravity | 1.344 |
| 5 | Shear Strength | 21.8MPa |
| 6 | Heat Deflection Temperature | 114.8 ºC |
| 7 | Peel Strength | 0.98kg/mm |
| 8 | Flexural Modulus | 14060MPa |
| 9 | Tensile Strength | 35.1MPa |
| 10 | Elongation at break | 13% |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.