Plain Oiled Grey Cast Iron Casting Railway Locomotive Brake Block
Rail Train Wagon Brake Shoe / Railway Cast Iron Locomotive Brake Block
Description
During the running of the train, brake is needed, and the brake parts are directly rubbed into the wheels to stop the train stopping.A tile brake block made of cast iron or other materials holds the wheel tread tightly during braking and stops the wheel from turning by friction. In this process, the braking device transforms the huge kinetic energy into heat energy dissipating in the atmosphere. The brake effect depends mainly on the dissipation capacity of frictional heat energy. When using this brake mode, the friction area of the brake shoe is small, and most of the heat load is borne by the wheel. The higher the train speed, the greater the heat load of the wheels when braking.
1. Good thermal stability. Resin decomposition temperature is high, the actual temperature is 377 degrees Celsius.
2. Low compression elasticity, low noise and uniform temperature distribution.
3. Strong viscosity, both resin aging resistance, and rubber toughness, low thermal decay rate, good recovery.
4, wear resistance is good, the surface has good reproducibility.
Material
The brake is fitting for the locomotive which speed is less than 100Km /H
There are three types as following:
1. Grey Cast Iron
2. High Phosphorus Cast Iron
3. Alloy Cast Iron
A. The chemical composition and mechanical properties
| Material | Chemical Composition% |
Tensile Strength Mpa |
Hardness HBW10/3000 |
|||
| C | Si | Mn | P | |||
| Grey Cast Iron | 2.9-3.5 | 1.8-2.2 | 0.6-1.2 | ≤1.0 | ≥150 | 179-255 |
| High Phosphorus Cast Iron | 2.8-3.6 | 1.5-2.2 | 0.8-1.2 | 1.3-2.0 | ≥150 | 179-255 |
| Alloy Cast Iron | 2.8-3.6 | 1.28-1.8 | 1.2-1.9 | ≤0.15 | 200-320 | 200-260 |
B. Average Friction Coefficient
| Braking speed Km/H | Grey Cast Iron | High Phosphorus Cast Iron | Alloy Cast Iron |
| 100 | 0.1 | 0.13 | 0.1 |
| 80 | 0.11 | 0.15 |
0.11 |
Product Details
|
Name
|
Brake Shoe For Wagons
|
||
|
Applications
|
Automobile,petroleum drilling machine;
Locomotive Parts for Passenger train or Cargo train.
|
||
|
Material
|
Cast iron,Composite material
|
||
|
Braking Force
|
High friction
|
||
|
Service LIfe
|
>12,000km
(Note: it must be replaced after 12,000 Km) |
||
|
Surface Treatment
|
1. Plain oiled
2. Painting |
||
Packing and Delivery
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.