Single Phase Portable Meter Tester accuracy 0.1 energy calibration system

KE8802 Portable Single Phase Meter Test System

KE8802 is a complete energy meter test system mainly applied for laboratory or outdoor test of single phase, active or reactive energy meter, which also can be used as voltage source or current source.

Features:

1. High accuracy and stability
2. Standard and source are integrated, it could be used as portable test system
3. Wide output range, the voltage output could be 265V, the current output could be 120A
4. 2^nd-21^st harmonics could be generated and the amplitude and the phase could be freely set
5. Perfect protective alarming function, auto protection of short circuit of voltage, open circuit of current,and overload
6. Full automatic or manual operation
7. Two channel pulse input could test 2 single phase meters simultaneously
8. It could communicate with the computer by the communication interface.

Main Specification:

Accuracy: 0.1%

Voltage output range (P-N): 24V – 288V
Output power: Max. 60VA
Resolution: 4mV
Stability: ≤ ± 0.03%/ 150 s
Load regulation rate: ≤ ± 0.01%
Distortion factor: ≤ ± 0.2% (linear resistance load)

Current output range: 10mA – 120A
Output power: Max. 150VA
Resolution: 0.02mA
Stability: ≤ ± 0.03% / 150 s
Load regulation rate: ≤ ± 0.01%
Distortion factor: ≤ ± 0.2% (linear resistance load)

Phase output range: 0 -- 360°
Resolution: ± 0.001°
 

Frequency output range: 45Hz – 65Hz
Resolution: ± 0.0001Hz

Demission (H x W x D): 230mm x 155mm x 312mm (without handle)
                                        275mm x 155mm x 312mm (with handle)
Weight: 11.5kg