ERIKC 0445120357 For BOS Diesel Injector Pump 0 445 120 357 Fuel Injection Pump Parts 0445 120 357

ERIKC 0445120357 For BOS Diesel Injector Pump 0 445 120 357 Fuel Injection Pump Parts 0445 120 357​

1 injector detail

2 injector picture

Other Hot product

Our company's main products :For BOS denso For Delp  piezo common rail injector ,  valve , nozzle , pump , repair kit , Fuel metering valve , Solenoid valve ,injector nozzle tester , injector repair tool and shim copper oring other injector parts

Injector FAQ

FAQ: Actual rail pressure is too high and fuel injection is below the threshold

ERIKC Answer: Symptom: The system pressure is too high. Generally, the system will have limited engine speed or torque after starting.

Possible Causes:

1) The poor oil return of the oil pump causes too much fuel to enter the oil pump plunger, resulting in excessive rail pressure; 2) The oil pump fuel metering unit stuck in the normally open or open position, resulting in high rail pressure; 3) oil pump overflow Flow valve stuck in the normally closed or open position, resulting in excessive rail pressure.

Troubleshooting method:

1) Check the oil pump return pipeline: a. Use a pressure tool to measure the oil pressure of the oil pump return port. The pressure value must be less than 1.2 bar absolute pressure. If it is not within the range, it means that the oil pump return pipe is blocked; b. Fully release the oil pump return pipe, start the engine and see if the fault disappears. If the fault disappears, the oil pump return pipe is blocked. If the fault does not disappear, check the high-pressure pump. 2) High-pressure pump troubleshooting: Method 1: Change the new oil pump to do the crossover test; Method 2: The high pressure tool measures the build pressure capacity of the oil pump.