ERIKC 0445120014 For BOS standard injector 0 445 120 014 diesel fuel For BOS common rail injector 0445 120 014 For Renau

ERIKC 0445120014 For BOS standard injector 0 445 120 014 diesel fuel For BOS common rail injector 0445 120 014 for For Renau

injector detail

injector picture

Other Hot product

Our company's main products :For BOS denso For Delp  piezo common rail injector ,  valve , nozzle , pump , repair kit , Fuel metering valve , Solenoid valve ,injector nozzle tester , injector repair tool and shim copper oring other injector parts

Injector FAQ

FAQ: Point of use and maintenance of the injector. To ensure that the diameter of the injector orifice meets the technical requirements?

ERIKC Answer:If it is found that the injection pressure of the injector is insufficient for the expansion of the injection hole, for a single-hole pin type injector, a steel ball with a diameter of 4 to 5 mm can be placed at the hole end and tapped with a hammer to make The injection hole produces plastic deformation locally to narrow the hole diameter. For the multi-hole direct injector, because of its large number of holes and small hole diameter, it can only be tapped with a special punch on the end of the hole. If the technical requirements are still not met after replacement, replace the needle valve assembly.

FAQ: The main points of use and maintenance of the injector. Avoid long-time diesel overload operation?

ERIKC Answer:The diesel engine should avoid overloading for a long time to prevent the needles of the injector from jamming due to overheating of the engine. For long-term storage of the diesel engine, the injector should be unloaded and immersed in clean diesel oil to prevent the needle valve from corroding and cannot be flexibly opened or closed.