ERIKC injector nozzle assembly DLLA 144 P 1423 For BOS common rail oil injection nozzle DLLA144P1423

FAQ: What is a remanufactured fuel injector

ERIKC Answer:A remanufactured fuel injector is a used fuel injector that has been ultrasonically cleaned, flow tested to make sure it complies to manufacturer specierikcation and then fitted with new O-rings, filters and pintle caps.ERIKC Answer:Very few injectors can be modified to increase the flow and still work correctly. Usually the spray patterns will be poor and their flow rates will be very mismatched after modierikcation.The only injectors we currently modify are the pink or blue top-feed Denso's and the yellow side-feeds that are used in the late model Subaru. These will typically flow within a few percent of one another after modierikcation. We perform this operation using a lathe or mill to prevent injector damage. See our Subaru Mods page page for pricing.

FAQ: Can stuck injectors that have sat for years be serviced?

ERIKC Answer:Injectors that are stuck closed due to non use for long periods can usually be serviced. We have better than a 95% success rate of getting them back up to spec.It sometimes takes an extra day or two in the shop for these. In some cases, corrosion has damaged them to a point where they can not be saved.