ERIKC F00VC01344 fuel For BOS injection valve F 00V C01 344 oil inyector control valve F00V C01 344 for 0445110276

ERIKC F00VC01344 fuel For BOS injection valve F 00V C01 344 oil inyector control valve F00V C01 344 for 0445110276

Valve Introduction

Valve Picture

Other ERIKC Valve List

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).

Injector FAQ

FAQ: What are the common problems with fuel injectors? Poor atomization of injector

ERIKC Answer: When the injection pressure is too low, the nozzle hole wears carbon, the spring face wears or the elastic force drops, it will cause the injector to open in advance, delay closing, and cause the phenomenon of poor spray atomization. If the single-cylinder diesel engine can not work, the multi-cylinder diesel engine will decrease in power, the exhaust will emit black smoke, and the machine operation sound will be abnormal. In addition, because the diesel droplets with too large particle size cannot be fully burned, they will flow into the oil pan along the cylinder wall, increasing the oil level of the oil, lowering the viscosity, and deteriorating the lubrication. This may also lead to accidents of burning the cylinder. Solution: The injector should be disassembled and cleaned, overhauled and re-commissioned.

FAQ: What are the common problems with fuel injectors? Injector return pipe damaged

ERIKC Answer: When the needle valve wear is serious or the needle valve body is not tight enough with the injector housing, the oil return of the injector increases significantly, and some can reach 0.1 to 0.3 kg/h. If the return pipe is damaged or missing, the return oil will be wasted, causing waste. Therefore, the return pipe must be intact and sealed so that the return oil can smoothly flow into the tank. If the return pipe is connected to a diesel filter, a one-way valve shall be provided at the terminal to prevent diesel oil in the filter from flowing back into the injector.