ERIKC F00RJ03510 For BOS fuel injector 0445120261 repair kits F 00R J03 510 ( F00R J03 510 ) injector nozzle DLLA153P2210

ERIKC F00RJ03510 For BOS fuel injector 0445120261 repair kits F 00R J03 510 ( F00R J03 510 ) injector nozzle DLLA153P2210

Repair Kit description

Repair Kit Picture

Injector Repair Kit list 

ERIKC hot product

Mainly producing and selling CR injectors, nozzles, control valves, valve bonnets, CRIN repair kits, injector adjusting shims, common rail injector testers and repair tools. Besides our own brand "HAOTENG" and "DYD", we are also the sole agent of UK ERIKC (the former OEM factory of famous international brand common rail Parts).
​

Injector FAQ

FAQ: Common Rail Injector Frequently Asked Questions. Is the nozzle blocked?

ERIKC Answer:Because the fuel is mixed with solid impurity particles, or carbon deposition due to poor combustion, the working time is a little longer and it will accumulate around the nozzle of the injector, so that the nozzle becomes a semi-blocking state. Once the orifice is blocked, the fuel supply pressure of the injection pump will rise and be accompanied by the sound of a knock.

Prevention methods: On the one hand, the fuel that enters the injector must be strictly filtered; on the other hand, by improving the combustion, it can prevent the clogging of the nozzle hole due to excess carbon deposition.

FAQ: Common rail fuel injector FAQ. Injector drip oil?

ERIKC Answer:When the injector works, the sealing cone surface of the needle valve body will be frequently subjected to strong impact by the needle valve. In addition, high-pressure fuel will be continuously ejected from there, and the cone surface will gradually wear or spot, thereby causing the injector to drip oil. . When the temperature of the diesel engine is low, the exhaust pipe emits white smoke, and when the temperature of the diesel engine rises, it becomes black smoke. The exhaust pipe emits irregular sound, and if the fuel supply to the cylinder is stopped at this time, the smoke emission and sound will disappear.

Remedy: Remove the fuel injector, check the movement of the needle valve is flexible, the sealing of the seat surface is good, and then carefully clean and refit or replace the new nozzle assembly.