Multifunctional Earth Ground Resistance Tester 0 Ohm To 4K Ohm And 100 Groups Display
0 Ohm To 4K Ohm And 100 Groups Display Digital Earth Ground Resistance Tester
English User Manual:https://drive.google.com/open?id=1Ytr2rcH3tm8nooeQgo76611C1z3gjdiM
Features of Earth Ground Resistance Tester
- Measurement method
- Relative measurement
- Read/Store the data obtained
- The measurement of maximum, minimum and average
| Earth Ground Resistance | ||
| RANGE | ACCURACY | RESOLUTION |
| 0∽29.99Ω | ±(2%+6dgt) | 0.01Ω |
| 30.0∽99.9Ω | ±(3%+3dgt) | 0.1Ω |
| 100∽999Ω | ±(3%+3dgt) | 1Ω |
| 1.00k∽4.00kΩ | ±(3%+3dgt) | 10Ω |
| Earth Voltage | ||
| RANGE | ACCURACY | RESOLUTION |
| 0V∽200V (50Hz/60Hz) | ±(1%+5dgt) | 0.1V |
| Feature | ||
| Display | Digital Display & Analog Bars Display | |
| Measurement mode | 2Pole & 3Pole Mold | |
| Earth Resistance | Earth Resistance By Constant Current | |
| Data Logging | 100groups | |
| MAV/MIN/AVG/REL | √ | |
| Measurement Functions | √ | |
| Inverter 800Hz/3mA | √ | |
| Display Back Light | √ | |
| Low Battery Indication | √ | |
| Auto Power Off | √ | |
| General | ||
| Power Supply | 6×1.5V AA Batteries | |
| Size | 194mm×150mm×172mm | |
| Net weight | Approx.858g(batteries are not included) | |
| Gross Rating | 2854g | |
| Safety Rating | EN61010-1, EN61557-3, EN61326-1 CAT. Ⅲ 1000V | |
Description of Earth Ground Resistance Tester
PM2302 Meter is applicable to test earth resistance of the power supply wires, distribution wires inside a room, electrical equipment or appliance. PM2302 can done in two measurement modes: Bi-poles or Tri-poles, it can be used to measure the earth voltage as well , large digital LCD and backlight applied to the meter facilitate users to read the information on LCD. Besides, the meter is capable of storing up to 100 groups of measurement data, which will not be lost even in case of power cuts so that the user can easily consult the historical data. In addition, the meter can also be used to measure maximum, minimum or average and measure relatively. Auto Power-off function has been provided for it.
- Constant Current Conversion is used for the measurement of earth resistance, with the frequency of the testing current about 800Hz and the size about 3mA.
- The meter is capable of storing up to 100 groups of measurement data, which will not be lost even in case of power cuts.
- Relative measurement can be accessible only when the tester is used for measurement of earth resistance. Press REL to switch the relative measurement mode with the normal one or vice versa.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.