YAMAHA

YG12 is a compact high speed laminator in YAMAHA series laminator. It has the ability of high speed laminator. It can use tape, tube and bulk components, mainly for laminator mounting.

A set of 10 in-line mounting heads, combined with the new scanning camera, enables high speed mounting of 36.000 chip components per hour under optimal conditions: mounting ranges from 0402mm (01005in) to 20mm components.

The corresponding PCB size is L50× W50mm-L510 × W460mm

Optimum mounting speed: 36,000CPH

Mounting accuracy: Absolute accuracy of 0.05mm/CHIP; repeatability

+ 0.03mm/CHIP

The main machine has 60 loading and feeding positions (measured in 8mm)

ER: L1,254 X W1,440 X H1,450mm

High rigidity integrated cast frame with high durability • High precision integrated frame

• Thorough analysis of the structure, based on a variety of experimental tests developed and manufactured

• Adapt to high acceleration drive to ensure high accuracy

PCB side clamp positioning device

PCB side fixing force track clamping fixed square

Type:

1, can better correct the PCB warping.

2, there is no need to open positioning holes on the PCB

3, components can be mounted to the edge of the PCB

Unique nozzle design

1, with a micro spring buffer device to prevent the absorbed components from being hard impact;

2, can be decomposed, easy to maintain;

3. Only damaged parts can be replaced after tip wear to reduce production costs.

feeder

The newly designed feeder weighs less than 1kg and is very easy to install and disassemble. The center distance of the adjacent feeder components is 12mm, which is the same as the nozzle spacing of the mounting head, and the synchronous component absorption of 10 nozzles can be realized.