Aluminium spacer bar 6A Bendable with high frequency and low price

Insulating Glass Aluminum Spacer Bar 6A

Product Description and advantage:
1. Material:3003 alloy aluminum
2.5.5mm side welding line,100% guarantee bendable.
3. wall thickness is within 0.30~ 0.35mm,and tolerance is ±0.025mm.
4. Appearance:Surface is Bright smooth and has no knocking. Air hole is uniform and in order.
5. It conforms to the standard requirement of “Insulating Glass
6.Size:5.5mm-35mm.

The water system consists of two independent water circulation systems: the first level water

circulation system and the second level water circulation system. Water is pumped out of the

water tank by the water pump and sprayed onto the glass surface by the spray pipe. After

cleaning the glass with a brush, the water flows back to the tank for recycling. The primary

cleaning water tank is equipped with a water heating device with temperature control, which

can keep water temperature automatically. In order to ensure the cleaning effect, the water

conductivity must be no greater than 40 (including s, if the water quality is bad, need to be

equipped with water treatment equipment, water after water treatment into the rinse water

tank, recycling according to the above steps, the water treatment device by the user should

bring along their own.

This screen shows the current state of production function of the machine.

"Cleaning speed" is the set of cleaning machine transmission speed.

"Upper frame setting time" refers to the delay stopping time of the second glass at the glass

locating device of the aluminum frame assembly section.