3A Molecular Sieve of low dust content 0.5-0.9 mm for Insulating Glass Using

Molecular Sieve Kation-DF-S


The insulating glass special molecular sieve is specially designed for the insulating glass industry,

it has the characteristics of high selective adsorption,. low dust content, high abrasion resistance

and sufficient strength, it provides excellent comprehensive performance for insulating glass,

completely solve the problem of ordinary insulating glass molecular sieve desiccant easy to

make insulating glass explosion or dew caused by expansion or contraction, fully guarantee

the safety and energy saving of insulating glass.

1.Highly selective adsorption

Homogeneous adsorption pore size, it can absorb vapor and hydrocarbons that can be atomized

inside the insulating glass unit, and exclude the absorption of nitrogen and other mixed gases

in the insulating glass unit, providing full dew point protection.

 
when the second piece of glass arrives at the photoelectric switch at the end of the inspection frame

mounting machine, the glass decelerates and stops at the glass positioning place. The aluminum

frame positioning system moves out automatically, and the aluminum frame positioning system

with the glue is put in place. If there is any problem with the glass, after removing it, step on the

foot switch again and start transmission. The next piece of glass will still be framed as the second piece.
 
When assembling aluminum frame, users can adjust the adjustment handwheel of glass side positioning

and aluminum frame positioning according to the need to realize the depth of different double-component glue.

2.Low dust content

Special manufacturing technology, the product has very low dust content, suitable for all kinds of molecular

sieve filling machine, and avoid static electricity in the use process.

first glass after inspection qualified to enter the pressure into the material section thickness in photoelectric

slow stop, start automatically measuring the thickness of the glass (if wrong thickness mode does not stop

here directly into the pressure plate section), thickness after entering or piece of flat section, to set forward

positioning distance, lateral positioning block flip seal plate, conveyor belt, inverted the glass to the locating

piece stop position, open the side seal plate. Clamp closed to moment before pressing stop location, synchro

nous belt transmission is raised, before pressing glass plate torque, chuck started action, will glass to absorb,

and then transmitted synchronous belt, open to the initial position before the board.

3.Compatibility

The scientific formula and advanced technology ensure the physical adsorption performance of the

products, do not corrode the spacers (aluminum, stainless steel, PPT and other materials), and have

good compatibility with the related materials of insulating glass