Extruded Polishing Custom Carbon Graphite Plate With High Purity Electric Conductivity graphite thermal pad
Extruded Polishing Custom Carbon Graphite Plate With High Purity Good Electric Conductivity graphite thermal pad
| Using instruction: |
1.Avoid contacting of hot molten metals with water, oil, grease, etc. It may cause excessive spatter and
burns.
2. Do not uses in flammable vapors or dust, a fire or explosion may happen.
3. void fire, mould must be stored in dry, well-ventilated area, away from open flame and excessive heat.
4. Avoid looking directly at the light of the reaction. It may irritate your eyes.
5. Wear safety glasses and leather gloves to use the mould.
| Export Market Distribution |
|
Main Foreign Markets
|
Total Revenue(%)
|
|
North America
|
40.00%
|
|
Western Europe
|
25.00%
|
|
Eastern Europe
|
15.00%
|
|
Eastern Asia
|
10.00%
|
|
Mid East
|
5.00%
|
|
Southeast Asia
|
5.00%
|
| Ingredients |
| Volume density | 1.8g/cm3 |
| Granularity | 15um |
| Resistivity | 8~10uΩm |
| Heat conductivity | 125W/m.k |
| Thermal expansivity | 4.9(10-6/℃) |
| Shore-hardness | 48 HSD |
| Bending strength | 35 Mpa |
| Compressive strength | 70 Mpa |
| Elasticity modulus | 99.5 Gpa |
| Porosity | 13% |
| Ash content | 500 PPM |
| Purification of ash | 50 PPM |
| Our History |
EG Graphite Industry Co,,Ltd GuiLin Factory is a manufacturer to produce and develop graphite moulds,
was founded in 2012.
From 2013,EG has been the only supplier of Graphite mould to " Champion Union"Group.
From 2014,EG was approved by the QUALITY MANAGEMENT SYSTEM ISO9001-2000;
Advanced Equipments and professional engineers help EG Industry develop rapidly, after 5 years
development, EG team greatly expand the product diversity and be a leading manufacturer in China.
| Our Factory |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.