PP IP44 Mosquito Killer Solar Powered LED Garden Lights With 35 Lumens / Battery

Product Details

Operation

Before first time use, allow the solar light to charge initially for at least 8-12 hours.

Step 1: Position the garden stake into the ground.

Step 2: Connect the support pole to the garden stake.

Step 3: Connect the solar panel to the support pole.

The switch is initially at the OFF position.

Battery replacement

Should the light source start to dull or stay on for shorter amounts of periods, we recommend that the rechargeable battery should be replaced in the following way.

Step 1: Remove the solar panel from plastic cover by turning anti-clockwise.

Step 2: Replace the spent battery with a new one making sure to get the polarity correct as

             this could damage the unit.

Troubleshooting

If your solar light does not turn at night, it may be caused by one of the following conditions:

1. Battery is not fully charged or needs replacement:

    Make sure your light is located in an area where the solar panel gets the maximum amount

    of full, direct sunlight every day. Allow sunlight to recharge the battery for A FULL, SUNNY

    DAY. If the weather has been cloudy or overcast during the day, the battery will not be

    recharged for operation at night.

    Replacement batteries can be purchased locally at a retailer near you.

2. Solar panel is dirty:

    A dirty solar panel will not allow the battery to fully charge. This will shorten the life of the

    battery and cause the light to malfunction. Clean regularly with a soft cloth or paper towel.

Other Products