Giant Composite Autoclave 500-4500mm Diameter with Double Safety Interlocking and 0.5-5.0Mpa Pressure Range
This fully automatic composite autoclave with double safety interlocking is engineered for precision curing of polymer-based composite components. The system integrates vacuum, control, heating, cooling, insulation, and safety systems to deliver consistent performance in advanced composite material manufacturing.
| Parameter | Specification |
|---|---|
| Effective Diameter | 500-4500mm |
| Effective Length | 1000-20000mm |
| Operating Temperature | 100-450℃ |
| Working Pressure | 0.5-5.0Mpa |
| Speed of Pressure Rise | 0.05Mpa/min (Continuously adjustable) |
| Pressure Error | ±0.01MPA |
| Heating Rate (No Load) | 0.5-7℃/min (Continuously adjustable) |
| Cooling Rate (No Load) | 0.5-7℃/min (Continuously adjustable) |
| Cooling Method | Water cooling or air cooling |
| Point Temperature Error | ±1-2℃ |
| Temperature Control Points | Inside tank and 2-20 points |
| Vacuum Degree | -0.098MPA |
| Extract Vacuum Pipe Lines | 2-20 |
| Test Vacuum Pipe Lines | 2-20 |
| Continuous Working Ability | ≥50 hours |
Comprising vacuum pump, pumping lines, measuring lines, and buffer tanks. Each vacuum line operates independently with pressure sensors, pneumatic valves, manual valves, and leak alarms for enhanced system stability and safety.
Utilizes professional hot-pressure temperature control software with PLC modules, sensors, and control cabinets. Provides real-time temperature monitoring and PID-controlled insulation phases for precise temperature management.
Features 304 stainless steel electric heating tubes, temperature fans, and circulation boards for rapid, uniform heating without dead zones.
Water-cooled design with variable frequency cooling pumps and high-temperature fans. PLC-controlled cooling rates ensure process consistency.
- High-pressure resistant tank construction with superior tightness
- Dual safety interlocking system with pressure automatic interlock and over-pressure alarm
- Quick-opening door mechanism (manual or automatic) with power-off capability
- High-temperature silicone sealing rated for 500℃ operation
- Precision pressure transfer and control system
- Efficient stainless steel heating system with uniform temperature distribution
- Advanced vacuum system for composite material processing
- PLC and fuzzy control system for high-precision temperature, pressure, and cooling management
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.