4T Conductor Stringing Equipment 3520×2000×1710mm Boundary 5km/H Max Pay - Off Speed
Powerline Equipment Hydraulic Tensioner Equipment 4T with imported Engine
Structure Parameter
| Bottom diameter of tension wheel groove | 1300mm |
| Trial traverse diameter | 40mm |
| Slot number | 5 |
| Total weight | 2300kg |
| Boundary dimension | 3520×2000×1710mm |
Performance Parameter
| Maximum intermittent tension | 45KN |
| Maximum sustained tension | 40KN |
| Correspending speed | 2.5km/h |
| Maximum pay-off speed | 5km/h |
| Corresponding tension | 20KN |
| Maximum back-traping force | 35KN |
Main Configuration Instructions
| Engine | imported |
| Reduction gear | German Rexroth |
| Hydraulic motor | German Rexroth/ Italy Brrevini |
| Pressure gage | German |
| Pressure pump | German Rexroth/ Italy Sam |
Engine
| Feeding | diesel |
| Cooling system | water |
| Electric system | 24V |
Product Introduction
Hydraulic tensioner GX1×40 fit to string one or two conductors or optical fiber cables.
One hydraulic circuit to tension at constant force even varying the speed of stringing.
-
One pair of steel capstans lined with multi-grooved nylon sectors.
-
Machine control panel equipped with hydraulic dynamometer and mechanical metercounter.
-
Device to control low-force tensions (1,5-20KN), specially fit for optical fibers.
-
Freewheeling disconnection(neutral) of capstans.
-
Two back fix conductor-drivers with nylon rellers.
-
Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in workplace.
-
Stabilisers, share and attachments for anchoring the machine.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.