BRPV3-600 Photovoltaic DC Surge Protection Device 20kA/40kA 600V for Solar Systems
The BRPV3-600 Photovoltaic DC Surge Protection Device provides reliable lightning and surge protection for 600V DC photovoltaic systems, with 20kA nominal and 40kA maximum discharge capacity.
- Maximum continuous operating DC voltage: 600V
- Type 2 / Class II certified per EN61643-31 and IEC61643-31
- Remote indication contact capability
- Optical LED status indicator
- Designed for 35mm DIN rail mounting
- High-temperature resistant flame retardant plastic housing
- Pluggable design with separable main device and base
| Parameter | Specification |
|---|---|
| SPD Classification (EN61643-31) | Type 2 |
| SPD Classification (IEC61643-31) | Class II |
| Max Continuous Operating DC Voltage (Ucpv) | 600V |
| Nominal Discharge Current (8/20μs) | 20kA |
| Max Discharge Current (8/20μs) | 40kA |
| Voltage Protection Level [(DC+/DC-)->PE] | ≤2.6kV |
| Response Time | ≤25ns |
| Operating Temperature Range | -40℃ to 80℃ |
| Operating State / Fault Indication | Green / Red |
| Cross-section Area (Min.) | 4mm² |
| Cross-section Area (Max.) | 35mm² |
| Mounting | 35mm DIN Rail |
| Enclosure Material | Thermal Plastic UL94-V0 |
| Degree of Protection | IP20 |
| Order Code | B8009 |
| Order Code (With Remote Signal) | B8011 |
- Lightning surge protection in solar photovoltaic power supply systems
- New energy wind power generation systems
- Solar DC power distribution systems including PV combiner boxes, DC power distribution cabinets, and grid-tie inverters
- DC power lightning protection for solar power systems, mobile communication base stations, telecommunications rooms, and industrial facilities
- Comprehensive failure indicators for easy monitoring
- Remote signal port enables remote alarm control
- Modular design simplifies maintenance procedures
- Minimal maintenance requirements with extended service life
- Install at the front of low-voltage distribution systems
- Position in main power system DC circuits for protection against indirect/direct lightning currents
- Must be installed in parallel on protected DC networks for common and differential mode protection
- Recommended installation at both ends of DC power supply lines (solar panel side and inverter/converter side)
- Essential for external and long line routing applications
Wenzhou Britec Electric Co., LTD. - Established in 2003, we are China's professional manufacturer of low voltage surge arresters with 17 years of global expertise in electrical protection products.
Production typically takes approximately 20 days, depending on order quantity.
All SPD products include a 2-year warranty.
We are the original manufacturer with our own production facilities.
Yes, samples are available with applicable sample fees and freight charges.
We accept T/T, PayPal, and other standard payment methods.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.