Single phase ac motor 220V 2500RPM 2.6KW AC Servo Motor 10N.M 10A , JK-G2A3215 Set industrial sewing machine
2500RPM 2.6KW AC Servo Motor 10N.m 10A & Driver JK-G2A3215 Set industrial sewing machine
Insulation resistance——500VDC 100MW Min
Insulation strength——1500VAC 1Minute
Environment temperature—— -20℃ ～ +50℃
Insulation glass——B
| Output Power: | 2.6KW | Rated Speed: | 2500RPM |
|---|---|---|---|
| Rated Current: | 10A | Holding Torque: | 10N.m |
| Rated Voltage: | 220V |
Technical data of 130ST-M10025 AC servo motor:
| Motor model | 130ST-M04025 | 130ST-M05025 | 130ST-M06025 | 130ST-M07725 | 130ST-M10010 | 130ST-M10015 | 130ST-M10025 | 130ST-M15015 | 130ST-M15025 | |||||||||||||||||||||
| Rated power(KW) | 1.0 | 1.3 | 1.5 | 2.0 | 1.0 | 1.5 | 2.6 | 2.3 | 3.8 | |||||||||||||||||||||
| Rated voltage(V) | 220 | 220 | 220 | 220 | 220 | 220 | 220 | 220 | 220 | |||||||||||||||||||||
| Rated current(A) | 4.0 | 5.0 | 6.0 | 7.5 | 4.5 | 6.0 | 10 | 9.5 | 13.5 | |||||||||||||||||||||
| Rated speed(rpm) | 2500 | 2500 | 2500 | 2500 | 1000 | 1500 | 2500 | 1500 | 2500 | |||||||||||||||||||||
| Holding torque(N.m) | 4 | 5 | 6 | 7.7 | 10 | 10 | 10 | 15 | 15 | |||||||||||||||||||||
| Peak torque(N.m) | 12 | 15 | 18 | 22 | 20 | 25 | 25 | 30 | 30 | |||||||||||||||||||||
| Voltage constant(V/1000r/min) | 72 | 68 | 65 | 68 | 140 | 103 | 70 | 114 | 67 | |||||||||||||||||||||
| Torque coefficient(N.m/A) | 1.0 | 1.0 | 1.0 | 1.03 | 2.2 | 1.67 | 1.0 | 1.58 | 1.11 | |||||||||||||||||||||
| Rotor inertia(Kg.m2) | 0.85x10-3 | 1.06x10-3 | 1.26x10-3 | 1.53x10-3 | 1.94x10-3 | 1.94x10-3 | 1.94x10-3 | 2.77x10-3 | 2.77x10-3 | |||||||||||||||||||||
| Line-Line Resistance(Ω) | 2.76 | 1.84 | 1.21 | 1.01 | 2.7 | 1.5 | 0.73 | 1.1 | 0.49 | |||||||||||||||||||||
| Line-Line Inductance(mH) | 6.42 | 4.9 | 3.87 | 2.94 | 8.8 | 4.37 | 2.45 | 4.45 | 1.68 | |||||||||||||||||||||
| Mechanical time-constant(Ms) | 2.32 | 2.66 | 3.26 | 3.80 | 3.26 | 2.91 | 3.36 | 4.05 | 3.43 | |||||||||||||||||||||
| Weight(Kg) | 6.2 | 6.6 | 7.4 | 8.3 | 10.2 | 10.2 | 9.8 | 12.6 | 11.7 | |||||||||||||||||||||
| Motor length L(mm) | 166 | 171 | 179 | 192 | 213 | 213 | 209 | 241 | 231 | |||||||||||||||||||||
| Encoder line number(PPR) | 2500 | |||||||||||||||||||||||||||||
| Insulation class | Class F | |||||||||||||||||||||||||||||
| Safety class | IP65 | |||||||||||||||||||||||||||||
| The operating of Environmental Conditions | Temperature: -20°C ~ +40°C Humidity: Below 90%RH No dewing | |||||||||||||||||||||||||||||
| Motor winding plug | Winding lead wire | U | V | W | PE | |||||||||||||||||||||||||
| Plug serial number | .2 | 3 | 4 | 1 | ||||||||||||||||||||||||||
| Photoelectric encoder socket (15 pin) | Signal lead wire | 5V | 0V | A+ | B+ | Z+ | A- | B- | Z- | U+ | V+ | W+ | U- | V- | W- | PE | ||||||||||||||
| Plug serial number | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 1 | |||||||||||||||
|
Absolute encoder socket (7 pin) |
Signal lead wire | E- | E+ | SD- | 0V | SD+ | +5V | PE | ||||||||||||||||||||||
| Plug serial number | 2 | 3 | 4 | 5 | 6 | 7 | 1 | |||||||||||||||||||||||
Installation dimension: unit=mm
Installation precaution:
1. Installation/disassembly components coupled to the motor shaft end, do not hit shaft hard to prevent the other side of motor shaft encoder was knocked out bad.
2. Striving to make the best of its shaft to prevent vibration and bearing damage.
We can also manufacture products according to customer's requirements.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.