2 Phase Stepper Motor Driver DM860H 7.2A DC 18-80V Driver For NEMA23 And NEMA34 Motor
Stepper motor Driver DM860H 2phase For cnc Router/Laser Machine 7.2A, DC 18-80V driver for NEMA23 and NEMA34 motor
Feature of Driver for nema23 and nema34 motor:
1. Stable performance with digital signal processing high-Rate processor
2. High-accuracy positioning in low subdivision
3. With the latest PI current control algorithm, the output torsion is large, giving you extraordinary high-Rate performance.
4. Can adapt to the harsh environment and strong anti-interference ability
5. The parameter self-tuning function is integrated in the drive, which can generate different adaptation parameters for different motors, so that the motor can achieve the best performance.
Specification of DM860H 2phase stepper motor driver:
Item Type: Stepper Motor Drive
Supply Voltage: DC24-110V or AC18-80V
Driving Current: 2.4-7.2A
Subdivision Progress: 2-200 subdivision optional
Optically Isolated Signal Input
Motor Noise Optimization
Can drive any 2-phase, 34-phase hybrid stepping motor below 7.2A
20KHz chopping frequency
Electrical characteristics:
| Input current | 24-80VDC power supply,capacity:not less than 200VA typical value:DC36V |
| Out current | 2.4A-7.2A,8gears adjustable,resolving power 0.5A |
| Drive mode | Double constant current PWM drive output |
| Insulation resistance | Normal pressure and temperature＞500M |
| Insulation resistance | Normal pressure and temperature500V/min |
| weight | about 400g |
Environmental requirements:
| Cooling method | Natural Cooling |
| Use Occasion | Avoid dust,oil mist and corrosive gases |
| Use temperature | 0℃-+50℃ |
| Ambient humidity | ＜80%RH,NO condensation,no frost |
| Shake | Maximum not more than 5.7m/s2 |
Current output setting table:
| Out peak current | SW1 | SW2 | SW3 |
| 2.40A | on | on | on |
| 3.08A | off | on | on |
| 3.771A | on | off | on |
| 4.45A | off | off | on |
| 5.14A | on | on | off |
| 5.83A | off | on | off |
| 6.52A | on | off | off |
| 7.20A | off | off | off |
Subdivision schedule:
| subdivision multiple | step number/circle (1.8°/whole step) | sw5 | sw6 | sw7 | sw8 |
| 2 | 400 | on | on | on | on |
| 4 | 800 | off | on | on | on |
| 8 | 1600 | on | off | on | on |
| 16 | 3200 | off | off | on | on |
| 32 | 6400 | on | on | off | on |
| 64 | 12800 | off | on | off | on |
| 128 | 25600 | on | off | off | on |
| 256 | 51200 | off | off | off | on |
| 5 | 1000 | on | on | on | off |
| 10 | 2000 | off | on | on | off |
| 20 | 4000 | on | off | on | off |
| 25 | 5000 | off | off | on | off |
| 40 | 8000 | on | on | off | off |
| 50 | 10000 | off | on | off | off |
| 100 | 20000 | on | off | off | off |
| 200 | 40000 | off | off | off | off |
Installation size of 2phase for cnc router:
Photo of DM860H stepper motor driver:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.