Manual Colorants Paint Tinting Equipment , Paint Dispenser machine
 
 
Sample show

 
Technical Data

 
HOW TO READ CANISTER GAUGES

The measuring unit of canister gauge is divided into two categories, one is US unit "Y" (1 "Y" is approximately equal to 1 aunce), and the other is metric unit "ml" (1 "ml" is approximately equal to 1 millilitre).
 
1. If the bottom of black gauge marks "31.25/48", i.e. "1Y=48cells=31.25ml", then the measurement method is as follows: the weight at black gauge reticle "28" equals 28*31.25/48.
2. If the bottom of red gauge marks "31.25/384", i.e. 31.25/384=1 red cell=0.08ml, then the measurement method is as follows: the weight of red gauge "1"=8 red cells=8*31.25/384.
3. If the bottom of black gauge marks "6ml", i.e. "1cells=1ml", then the measurement method is as follows: 10cells=10ml at black gauge.
4. If the bottom of red gauge marks "7ml", then the measurement method is as follows: the weight of red gauge "1"=10 red cells=1 ml, 1 red cell=0.1ml.
5. Note: When you operate with double pumps double gauges, please use black gauge in even number for those gauge numbers above "6" and use red gauge in odd number for those gauge numbers below "6".
 
 
Manual paint dispneser machine FAQ

4. What's the color of the canisters?
black or white can be chose
5. Can it stirring to prevent the clorant from subsiding?
Yes! it can. The program was set automatically stirring every four hours for five minutes to prevent the colorant to subside, you can also press the button to stirring whenever you want.
 
6. What's the scale/gauge rule?
three options:

• 60ml (unit: 1ml, 0.1ml)
• 1Y=29.574ml (unit : 1/48 , 1/384 US oz)
• 1Y=29.574ml (unit : 1/64 , 1/384 US oz)

 
Features

 
Our Service

1. Testing of equipments: all our machines are tested before shipment. All machines are at its optimal state when shipped.
2. Warranty Service: Warranty period is 12 months. Within guarantee period,we can help you judge the fault according to the failure phenomenon by E-mail. and send replacement part to you except for the man-made factors.
3. Training:You can send personnel to our factory for free training on the machine.
4. Inspection: You can send inspectors to our factory for inspection or we self-inspect following the technical requirements mentioned in contracts.

 
Company Profile