1. RAL Powder Coating

COLORS AVAILABLE

• RAL colors coating powder
• Pantone colors
• Color-matching is available

2. GENERAL TYPES

• Polyester /Hybrid powder coating color
• Epoxy Powder coating color
• Metallic powder coating color
• Hammer tone color powder coating
• Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

3. PHYSICAL PROPERTIES

• Specific gravity : 1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity: 24 ~ 27 mm

4. CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

5. AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

6. STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.

7. HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust. Proposed operators wear appropriate dust mask, glasses. If possible, try to avoid long-term skin contact with powder coating

Trade items of Products