Single-Point 434MHz Remote Control Signal Blocker/Single-Channel Remote Control Signal Shielding Device

Description:

This single-channel remote control signal shield is also a plastic case. It was originally designed as a single-point 434MHz signal blocker. It is also a hand-held shield, and this model also has a built-in lithium battery that can be charged on one side. It can also be used after charging while using it. The price of this one is also very favorable, please contact us if you need.

Parameter:

Instructions:

Open the monitor battery cover and install the 9V battery. Pay attention to the positive and negative of the battery,after the battery is finished, turn the side power switch to on , the monitor is powered on, and press the front button, the blue indicator is on, the monitor transmits a wireless signal of 434MHz. Release the front button, the blue indicator turns off, and the monitor stops working. When using the pull rod antenna is the best when pulled out.

Precautions:

1.Turn off the side power switch when you are not using it for a long time or when you go out for a long time.

2.Please use in a suitable shielded environment, so as not to affect the use of effects.

3. Avoid exposure, rain, water droplets, long-term exposure to high temperature and humidity.

4.The effective range of the instrument is a circular area centered on the main unit. Therefore, when using it, be careful to select the correct position of the instrument so as not to produce a blind corner.

5.This product is sensitive to remote control products. It will shield the remote control signals such as electric cars, cars, remote control doors, access control, etc. Please use it rationally.