Various Liquid Activated Alumina Balls Low Abrasion Alumina Ceramic Balls
Activated Alumina Drying Of Various Liquids Such As Benzene, Carbon, Tetrachloride, Chlorobenzene, Ethyl Acetate, Etc
Products Introduction
Activated Alumina Desiccant, to be used as adsorbent, desiccant and catalyst carrier. It is also a kind of trace water desiccant and pole-molecule adsorbent, according to the adsorbed molecule polarization, the attachment force is strong for water, oxide, acetic acid, alkali etc.
The capacity of Activated Alumina Desiccant is stable, and Activated Alumina Desiccant has high strength, low abrasion, no softening in water, no expansion, no powdery no crack.
Technical index
| Activated Alumina Desiccant Typical Physical Properties | |||||
| Items | Unit | Value | |||
| Crystalline Phase | χ-ρ | ||||
| Particle Size | mm | 3.0-5.0 | 4.0-6.0 | 5.0-7.0 | 6.0-8.0 |
| Appearance | - | White Sphere | |||
| Bulk Density | g/cm3 | 0.70-0.80 | |||
| Crush Strength | N ≥ | 150 | 180 | 200 | 230 |
| Specific Surface Area | m2/g | 300-330 | |||
| Pore Volume | cm3/g | 0.40-0.50 | |||
| Attrition Rate | wt% ≤ | 0.1 | |||
| Static Water Adsorption | wt% ≥ | 18 | |||
| LOI(1000℃) | - | 4-7 | |||
| AL2O3 | % ≥ | 94 | |||
| SiO2 | % ≤ | 0.02 | |||
| Fe2O3 | % ≤ | 0.02 | |||
| Na2O | % ≤ | 0.20 | |||
| The interval value of the indexes above are on the basis of the different grade of Activated Alumina Desiccant | |||||
Application
Activated alumina for removal of fluoride and arsenic is our latest advancement for removing fluoride from drinking water and is a very effective alternative to the commonly used Activated Alumina media.
Storage
Avoid moisture, avoid scrolling, throw and sharp shocking during transportation, rainproof facilities should be readied.
It should be stored in dry and ventilated warehouse to prevent contamination or moisture.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.