Beige 3a Molecular Sieve Desiccant 3 Angstrom Molecular Sieves For Refrigeration Filter

Price Negotiable

Price: Negotiable

MOQ: 10 Kilograms

Delivery Time: 3-15 work days

Brand: Xi'an Lvneng

Product Description

3a Molecular Sieve Desiccant For Refrigeration Molecular Sieve Filter

Application

Drying of refrigerants.
Application of 3A Zeolite Molecular Sieve in isopropanol dehydration.
3A Zeolite Molecular Sieve used for professional kerosene and jet fuel drying.
For ethanol dehydration of methanol, and 3A Zeolite Molecular Sieve professional.
3A Zeolite Molecular Sieve used for natural gas dehydration and prevent the formation of COS.
For dehydration of benzene, toluene, xylene and other solvents ( e.g. ethanol, methanol ).
Static, (non-regenerative) dehydration of insulating glass units, whether air-filled or gas-filled.
For application in ethanol, methanol and other alcohol dehydration of 3A Zeolite Molecular Sieveprofessional.
Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required.
3A Zeolite Molecular Sieve used for desiccation of gases and liquids, such as associated gas in the oil field and natural gas.
3A Zeolite Molecular Sieve used in oil gas, unsaturated hydrocarbon material dehydration of 3A molecular sieve professional.
3A Zeolite Molecular Sieve used in deep desiccation of cracked petroleum gases, such as ethylene, propylene, butadiene, acetylene and natural gas, and of the polar liquid, such as ethanol, LPG and solvent.

Chemical Formula:

2/3K2O*1/3Na2O*Al2O3*2SiO2*9/2H2O

Technical Index:

Molecular Sieve 3A Typical Physical Properties
Item		Unit	8*12 Mesh	4*6 Mesh
Bead Size		mm	1.6-2.5	3.0-5.0
Bulk Density		g/ml ≥	0.70-0.82	0.65-0.80
Equilibrium Water Capacity @ 25℃		wt% ≥	19.0-21.0	19.0-21.0
Equilibrium Ethylene Capacity		mg/g≤	3.0	3.0
Heat of Adsorption		BTU/lb of H₂O	1800	1800
Crush Strength	Point Contact	N ≥	20-58	80-130
Crush Strength	Variation Coefficient	-	0.3	0.3
Attrition Rate		wt% ≤	0.1	0.1
Size Qualification		% ≥	98	98
Package Moisture		wt% ≤	1.5	1.5
The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 3A

Storage

The molecular sieve shall be stored at room temperature, in which the relative humidity does not exceed 90%, and be not exposed to air, and prevented against water, acids and alkalizes.

Attention

1. The product cannot be exposed in the open air and should be stored in dry condition with the air-proof package.

2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.