High Temp Molecular Sieve 13x Msds Remove Mercaptans From Hydrocarbon Liquid Streams
13x Molecular Sieve Desiccant Remove Mercaptans From Hydrocarbon Liquid Streams
Introduction
Zeolite 13X Molecular Sieve 13X is kind of sodium aluminosilicate, with a pore opening of 9-10 angstroms (0.9nm). The main component of the X-type molecular sieve is aluminosilicate, silicon-oxy and alumina tetrahedron to form an FAU-type structure, as know as NaX-type.
Technical Parameter
| Molecular Sieve 13X Typical Physical Properties | ||||
| Items | Unit | 8*12 Mesh | 4*6 Mesh | |
| Bead Size | mm | 1.6-2.5 | 3.0-5.0 | |
| Bulk Density | g/ml ≥ | 0.68-0.85 | 0.65-0.80 | |
| Equilibrium Water Capacity @ 25℃ | wt% ≥ | 24.0-27.0 | 24.0-27.0 | |
| Equilibrium Carbon Dioxide Capacity | wt% ≥ | 18 | 18 | |
| Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 | |
| Crush Strength | Point Contact | N ≥ | 30-80 | 80-130 |
| Variation Coefficient | - | 0.3 | 0.3 | |
| Attrition Rate | wt% ≤ | 0.1 | 0.1 | |
| Size Qualification | % ≥ | 97 | 97 | |
| Package Moisture | wt% ≤ | 1.5 | 1.5 | |
| The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 13X | ||||
Application
| Water, dioxide, hydrocarbons removal |
| General industrial gases drying |
| Gas purification in air separation process |
| Natural gas, liquefied petroleum, liquid hydrocarbons(propane, botane…) dehydration |
| Sulfur dioxide and mercaptan removal |
| General gas (such as compressed air, permanent gas) deeply drying |
| Ammonia synthesis gas drying and purification |
| Aerosol propellant desulfurization and deodorization |
| Carbon dioxide removal from cracked gas |
Regeneration:
Molecular sieve Type 13X can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 13X molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process
Attention
Pls avoid damp and pre-adsorption of organic before running, or it must be reactivated.
1. We promise to reply to your inquiry relational our product within 24hours.
2.OEM&ODM service for your unique idea with absolutely convenient.
3.The experienced foreign trader with professional product knowledge.
4. The value on business credite, promise to protect your sales data, design, patent information.
5. Sample & OEM service is available
6. After-sales service. any question will be settled within 3 days
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.