NPT 3 / 8 Nickel Plated Brass Metal Electric EMC Cable Gland T Type

Product characteristics

1. The use of tetrafluoro gaskets can reduce friction between rubber and metal surfaces and improve service life.

2. Spring shielding layer is adopted, the contact surface of bottle blank is large and the installation efficiency is high.

3. The inner rubber is made of silica gel, which can meet the normal work of the product in extremely cold weather.

4. The product realizes the contact sealing between clamping ring and cable surface, which has little damage to cable and can effectively prevent the internal of motor or controller.

Joint Profile

Cable joint is an indispensable part of cable line. It can realize the connection of two cables and improve the electric field at the end of two cables. The cable joint in the middle part of the cable line is called the intermediate joint, while the cable joint at the two ends of the line is called the terminal head.

Usage method

• Metal cable waterproof gland is the accessory of cable. The products are widely used in oil, chemical, machinery, nuclear power, shipbuilding, paper, pharmaceutical, food, aerospace and other fields.
• The gland can lock the cable, and the other end can be connected to the upper part of the equipment box, or screw thread can also be selected.
• Access to the import and export of the internal thread on the electric equipment. General mechanical control box, distribution plate, machine.
• Wire and cable fixed, can effectively clamp the cable and achieve the purpose of waterproofing.
• The main function is to make the line unobstructed, to keep the cable sealed, and to ensure the insulation level of the cable gland to ensure its safe and reliable operation. If the sealing is bad, not only will the oil leakage cause the drying of the oil impregnated paper, but also the moisture will intrude into the cable, causing the insulation performance of the paper to decrease.

Buyer's notice