Pressure Management valve Switch Pressure Based On Time Or Flow Rate Ductile Iron EPOXY Coated​

Description:

P26 series is for pressure management valves

1. P26M can switch two sets of pressure in six different time zones in one day. It helps to manage the pressure in different time zone when flow rate demand varies.

2. P26U can switch pressure based on high / low flow rate. The reading is from water meter with RS485.

3. P26H can change the outlet pressure based on real time flow rate. You can define the curve between flow rate and outlet pressure.

Featurea:

•10 years life lithium battery
• A black control box and solenoid valve connected to the control tube system.
• P26M - 6 different time zone with 2 different pressure in one day. Each day is independent for setting.

• P26U- has 2 flow rate setting value (lower and higher level), to switch between the 2
different setting pressure
• Both P26M & P26U types has a control box and solenoid valve on the main valve.
• P26U- same main valve as P26M. The purchaser can combine either an ultrasonic or magnetic meter which can provide a RS485 signal connected to the control box
• Single remote controller can be fitted for multiple valves setting use, no matter numbers of valves
• Remote Controller
• Controller box can be set either by timing or flow rate thru remote controller

Service Fields:

For water system, irrigation system.

Technical Data:

Size Range: DN50~DN800mm
Pressure Ratings: 1.0Mpa; 1.6Mpa; 2.5Mpa
Working Temperature:-10°C- 80°C Suitable
Media: Water
End connection: PN 10 / PN 16 / PN 25
Consult Factory for other applications
IP68 for water resistance
Comply with BS EN 1074-5, ISO 5208, BS
EN 12266-1, BS EN 558-1

Series Description:

Materials And Dimensions DN50-DN350

Materials And Dimensions DN400-DN800