B2B Operation :mobile operation from dynamo and starter battery (Battery to Battery):
it refers to charging the main battery through dynamo and starter battery, .If it is not used in the Vehicle , you can also use
one battery (12V) to charge another
1. .The efficient charging converter (booster) allows full charging of the board battery during
2. . It increases/reduces the voltage to the level, which is required for precise charging of the board battery with the optimum
characteristic line of
3. .The simultaneously supplied 12 V consumers are protected against overvoltage and voltage

Further Characteristics of the Unit

* Theoutput voltage is stabilized, free of peaks, smoothed and
* Galvanic isolation between input andoutput:
* Noovervoltage at the output and thus protection of the consumer if the ground line is
* Clean,undisturbed mass ratios, even with long supply
* Stableoperating voltage on site in mobile operation, g. Containers, trailers, roll containers etc.
* Filteringand suppression of disturbances on the input to the output
* Fullyautomatic continuous operation: The DC-DC converter can constantly work with the battery
* Surveillance-free operation: multiple protection against overload, overheating, overvoltage, shortcircuit, Misconduct and deep
discharge of the battery through electronic regulation to complete

Switch off by built-in safety switch.