Thermal Stability Lamination BOPP Film Roll Transparent Inner Pack Density 0.91 g/cm3

Introduction:

BOPP Oriented films can be used as heat-shrinkable films in shrink-wrap applications or can be heat set to provide dimensional stability. Heat sealing is difficult in BOPP films, but can be made easier by either coating the film after processing with a heat-sealable material (such as polyvinylidene chloride) or by coextrusion with one or more copolymers before processing to produce layers of film. Copolymers used in sealing layers must have high gloss and clarity and should have low sealing temperatures to prevent distortion of the oriented polymer during sealing. Random copolymers containing 3–7% ethylene are often used as sealing layers; the lower melting point (<132°C; <270°F) results in a 30% increase in line speeds, and they can be recycled with no significant loss of strength or clarity. Coating or coextrusion increases the barrier properties of BOPP film, decreasing its permeability to gases. Common barrier polymers are ethylene vinyl alcohol, polyvinylidene chloride, and polyamide; five or more layers may be coextruded or laminated, or the barrier polymer can be dispersed in the matrix polymer

Information:

Feature:

1. PETG Optical Grade Sheet adopts imported raw materials and conform to International Eco-friendly Standard
2. The supreme thermoformal performance, non-crystallization ever, easily shaping
3. Super clear, high luminous, the light transmittance can reach 90%
4. Great chemical resistance with acid resistance, alkali resistance and so on
5. Easily processing with cutting, drilling, punching, shearing, riveting, edge milling, cold bending, it can be cut by laser

Shows: