Customized Shiny Blue Inner Frame Paperboard For Cigarette Tobacco Package
Customized Shiny Blue Inner Frame Paperboard For Cigarette Tobacco Package
Introduction:
(1) taking the cardboard as the paper base, setting one surface as the outer surface and the other side as the inner surface;
(2) laying a layer of plastic film on the outer surface to become the plastic film layer;
(3) laying a layer of adhesive on the inner surface as the first adhesive layer;
(4) laying a layer of adhesive on the outer surface of the first adhesive layer Lay a layer of smoke film slurry as the smoke film layer;
(5) lay a layer of adhesive outside the smoke film layer as the second adhesive layer;
(6) lay a layer of breathable paper outside the second adhesive layer as the breathable paper layer; take the breathable paper layer as the innermost layer.
Parameters:
| ITEM | UNIT | TECHNICAL REQUIREMENT |
| Grammage | g/m2 | 230±10 |
| Thickness | mm | 0.3±0.02 |
| Width | mm | 95±0.5 |
| CD Stiffness | mN.m | ≥3.1 |
| Stiffness MD/CD Ratio | % | ≤ 2.1 |
| MD Folding Endurance | / | ＞15 times |
| △Eab | / | ≤ 3.0 |
| Brightness(Front) | % | ＞78 |
| D65 Fluorescent Brightness | % | ≤ 1.0 |
| Smoothness | S | ≥200 |
| COBB | g/m2 | Top ≤50.0, Back ≤50.0 |
| Moisture | % | 6.0±1.5 |
|
Inner Core |
mm | 120±0.5 |
Application requirements and notes:
1. Before use, make the suitable viscosity according to the rotogravure printing speed with the diluent which should be prepared and agitated homogeneously ahead. In the agitation, add the water based ink and agitate fully to homogeneous to the appropriate viscosity.
2. Drying temperature 90 ~ 110.
3. The usual weight ratio of diluent (ethanol: Water =1: 1), if you need drying slower, reduce the usage of ethanol; Otherwise, increase the amount of ethanol.
4. Our product is made of special materials, which can not be mixed with other manufactures' products, to avoid the waste
Picture:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.